Onkyo TX-NR509 Specifications, Amplifier Section, Video Section, Tuner Section, General

Page 74

Specifications

Amplifier Section

Rated Output Power

All channels: (North American)

80 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.7% (FTC) 110 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.9% (FTC)

(Others)

5 ch 130 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)

Maximum Effective Output Power

(Asian)

5 ch 160 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

180 W (3 , Front)

160 W (4 , Front)

100 W (8 , Front)

THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power)

Damping Factor 60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance (Unbalance)

200 mV/47 k(LINE)

Rated RCA Output Level and Impedance

200 mV/2.2 k(REC OUT)

Maximum RCA Output Level and Impedance 2 V/2.2 k(REC OUT)

Frequency Response 20 Hz - 50 kHz/+1 dB, -3 dB (DSP bypass)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

100 dB (LINE, IHF-A)

Speaker Impedance

6 - 16

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 (Component Y)

0.7Vp-p/75 (Component PB/CB, PR/CR) 1 Vp-p/75 (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

Tuner Section

FM Tuning Frequency Range

(North American) 87.5 MHz - 107.9 MHz

(Taiwan) 87.5 MHz - 108.0 MHz

(Others) 87.5 MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

Power Supply

(North American and Taiwan)

 

AC 120 V, 60 Hz

 

(European and Australian)

 

AC 230 V, 50 Hz

 

(Others) AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American and Taiwan) 3.9 A

 

(European and Australian) 370 W

 

(Others) 410 W

No-sound Power Consumption

(North American, European and Taiwan)

45W

(Others)

45W (230 V)

50W (240 V)

Stand-by Power Consumption

 

(North American and Taiwan) 0.2 W

 

(Others) 0.3 W

Dimensions

435 mm 173.5 mm 328 mm

(W H D)

17-1/8" 6-13/16" 12-15/16"

Weight

(North American and Taiwan)

 

8.5 kg (18.7 lbs.)

 

(European and Australian)

 

9.2 kg (20.3 lbs.)

 

(Others)

 

9.3 kg (20.5 lbs.)

HDMI

 

Input

IN 1, IN 2, IN 3, IN 4

Output

OUT

Video Resolution

1080p

Audio Format

Dolby True HD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, DeepColor,

 

x.v.Color, LipSync, CEC (RIHD)

Video Inputs

 

Component

IN 1, IN 2

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

Video Outputs

 

Component

OUT

Composite

MONITOR OUT, VCR/DVR OUT

Audio Inputs

 

Digital

Optical: 2

 

Coaxial: 2

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

TV/CD, AUX

Audio Outputs

 

Analog

VCR/DVR, ZONE2 LINE OUT

Pre Outputs

SBL, SBR

Subwoofer Pre Output

1

Speaker Outputs

Main (L, R, C, SL, SR)

Phones

1 (6.3 ø)

Others

 

Setup Mic

1

Universal Port

1

RI

1

USB

1 (Front)

Ethernet

1

En

Specifications and features are subject to change

74

without notice.

 

Image 74
Contents TX-NR509 Attain an abnormal high temperature Local regulations when disposing of batteriesTemperature protection operates if the apparatus 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Installing the batteries Supplied AccessoriesMake sure you have the following accessories Aiming the remote controllerContents Amplifier FeaturesPure Audio Mode European, Australian and Asian models ProcessingFront & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesRear Panel Remote Control jackSee Connecting the AV Receiver for connection pages 11 to Composite video and analog audio jacksRemote Controller Controlling the AV ReceiverConnecting the Speaker Cables Connecting the AV ReceiverConnecting Your Speakers Screw-type speaker terminalsAttaching the Speaker Cable Labels Speaker ConfigurationSpeaker Connection Precautions Using a Powered Subwoofer TipAV Cables and Jacks Connecting AV componentsAbout AV Connections Hdmi cableJack Components Assignable Connecting Components with HdmiAudio return channel ARC function Connecting Your Components Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentPlug the power cord into an AC wall outlet Connecting the AntennasConnecting the Power Cord North AmericanTurning Off Turning On/Off the AV ReceiverTurning On AV receiver comes on, the display lightsPlaying the Connected Component Controlling Contents of USB or Network DevicesPlayback Playing an iPod/iPhone via USB Standard Mode controlUnderstanding Icons on the Display Listening to Internet Radio Extended Mode controlPlaying a USB Device Listening to vTuner Internet RadioTop menu of Internet Radio Listening to Other Internet RadioRegistering My Favorites*1 Using Remote Playback Windows Media Player 11 SetupWindows Media Player 12 Setup Playing Music Files on a ServerAuto tuning mode Using the TunerTuning into Radio Stations Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American and Taiwan modelsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Measurement procedure Using Basic FunctionsUsing the Automatic Speaker Setup Error Messages Changing the Speaker Setup ManuallyUsing a Powered Subwoofer Using the Listening Modes Selecting Listening ModesInput Source About Listening ModesExplanatory Notes Speaker LayoutOnkyo-Original DSP Listening Modes Listening ModesDolby Digital Resolution AudioDolby EX Dolby Digital Plus *3That fully envelops the listener Listening Mode Description Input Speaker Source Layout Neo6Use this mode with any stereo movie e.g., TV, DVD, VHS Neo6 CinemaDisplaying Source Information Using the Home Menu Using the Sleep TimerSetting the Display Brightness Changing the Input Display Using the Music OptimizerUsing Headphones Muting the AV ReceiverRecording Separate AV Sources Common Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Digital Audio Digital Audio Input Hdmi InputComponent Component Video Input Explanatory NotesSp Config Speaker Configuration Level Cal Level Calibration Sp Distance Speaker DistanceDolby Audio AdjustMultiplex/Mono Audyssey Source SetupTheater-Dimensional Sync Preset Name For Input SelectorDynamic Volume SyncHardware Setting the Incoming Digital Signal Fixed ModeRemote Control Audio SelectorTuner Auto StandbyHdmi Through Hdmi SetupHdmi Ctrl Rihd Audio TV OutNetwork Setup Tone Control UpdateUsing the Audio Settings Speaker LevelsCinemaFILTER Late Night FunctionMusic Optimizer Zone Connecting the Zone Speakers to an Additional AmplifierOperating on the remote controller Making Zone 2 ConnectionsUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Controlling Your iPod/iPhone RI DockAvailable buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller Controlling a TVNumber +10 Cassettetape deckTV VOL q/w CH + Disc +Audio TroubleshootingPower Video UP-A1 Dock for iPod/iPhone Remote ControllerTuner Zone USB Device PlaybackRecording Music Server and Internet RadioVideo Atton Gain is reduced by 2 dB Video Attoff defaultVideo Attenuation Network Requirements Network/USB FeaturesConnecting to the Network Server RequirementsAbout Dlna USB Device RequirementsSupported Audio File Formats Updating the Firmware via Network Firmware UpdateUpdate procedure Before you startError Code Description TroubleshootingErrors during an update via Network CaseUpdating the Firmware via USB Europe Errors during an update via USBAmericas China, Hong KongAudio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the settings How to connect and setupConfirm the connection and settings Operate with the remote controllerVideo Section SpecificationsAmplifier Section Tuner SectionMemo 4 0 0 5 7 1 a
Related manuals
Manual 2 pages 12.24 Kb

TX-NR509 specifications

The Onkyo TX-NR509 and HT-S6405 combination presents an impressive entry point into the world of home theater systems, delivering remarkable audio performance and convenient features for the everyday user. The TX-NR509 is a powerful 7.1-channel AV receiver that boasts a rich assortment of technologies designed to elevate movie and music experiences.

One of the most notable features of the TX-NR509 is its ability to handle high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats ensure that soundtracks are delivered with impeccable clarity and depth, making them a perfect pairing for a high-definition viewing experience. Additionally, the receiver supports various audio formats, including FLAC and WAV, providing full compatibility with lossless audio files and ensuring audiophiles can enjoy their favorite tracks without degradation.

In terms of connectivity, the TX-NR509 is equipped with six HDMI inputs, allowing users to connect multiple devices easily, including Blu-ray players, gaming consoles, and streaming devices. One HDMI output supports Audio Return Channel functionality, streamlining the connection between TV and receiver and enhancing convenience, particularly for late-night TV viewing.

The HT-S6405 complements the TX-NR509 by including a complete 5.1 speaker package designed to create a comprehensive surround sound experience. The compact satellite speakers and an impressive subwoofer work harmoniously to deliver a balanced soundstage with deep bass and crisp highs. The subwoofer, with its dedicated amplifier, ensures that the low frequencies resonate richly, perfect for both action-packed movies and subtle musical nuances.

The combination also features Onkyo's proprietary AccuEQ technology, which offers room calibration for optimizing audio settings based on the unique acoustics of any space. This ensures that users experience sound that is well balanced and tailored to their environment.

Supporting the latest in streaming capabilities, the TX-NR509 includes built-in internet radio and streaming via vTuner, as well as USB connectivity for easy access to digital music files from various sources. With its user-friendly interface, setting up this system is straightforward, making it a fantastic option for users who want high-quality sound without a complicated setup process.

In summary, the Onkyo TX-NR509 and HT-S6405 offer a remarkable blend of technology, sound performance, and user-centric features, making it an excellent choice for a home theater setup. Its combination of high-definition audio support, seamless connectivity, and advanced calibration technology positions it as a reliable option for enhancing entertainment at home.