Onkyo TX-NR509 instruction manual Update, Using the Audio Settings, Tone Control, Speaker Levels

Page 50

Update

Menu

Update

See “Firmware Update” for the update procedure

(➔ page 66).

Note

•Perform the firmware update only when such an announcement is posted on the Onkyo web site. Visit the Onkyo web site for the latest information.

•It takes about 30 minutes to complete the firmware update.

■Version

Displays the current version of the firmware.

■Receiver

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update the AV receiver’s firmware. Do not shutdown the power of the AV receiver while updating.

■Universal Port

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. You can update the Onkyo dock’s firmware. Do not shutdown the power of the AV receiver while update.

Note

•This update shall not be performed when no dock is connected to UNIVERSAL PORT jack.

En

Using the Audio Settings

You can change various audio settings from the Home menu (➔ page 36).

1

Press RECEIVER followed by HOME.

2

Use q/wand ENTER to select “Audio”, and then

 

use q/w/e/rto make the desired selection.

Note

•These settings are not available in either of the following cases:

–a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 48).

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 48) and you’re listening through your TV speakers.

Tone Control

■Bass

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output from the front speakers.

■Treble

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output from the front speakers.

You can adjust the bass and treble for the front speakers, except when Direct or Pure Audio (European, Australian and Asian models) listening mode is selected.

Operating on the AV receiver

1

Press TONE on the AV receiver repeatedly to

 

select either “Bass” or “Treble”.

2

Use + and – on the AV receiver to adjust.

Note

•To bypass the bass and treble tone circuits, select the Direct or Pure Audio listening mode.

Speaker Levels

■Subwoofer Level

`–15 dB to 0 dB to +12 dB in 1 dB steps

■Center Level

`–12 dB to 0 dB to +12 dB in 1 dB steps

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to “Level Cal (Level Calibration)” (➔ page 42) before setting the AV receiver to Standby.

Note

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to “No” or “None” in “Sp Config (Speaker Configuration)” (➔ page 41) cannot be adjusted.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents TX-NR509 Attain an abnormal high temperature Local regulations when disposing of batteriesTemperature protection operates if the apparatus 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Installing the batteries Supplied AccessoriesMake sure you have the following accessories Aiming the remote controllerContents Amplifier FeaturesPure Audio Mode European, Australian and Asian models ProcessingFront & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesRear Panel Remote Control jackSee Connecting the AV Receiver for connection pages 11 to Composite video and analog audio jacksRemote Controller Controlling the AV ReceiverConnecting the Speaker Cables Connecting the AV ReceiverConnecting Your Speakers Screw-type speaker terminalsAttaching the Speaker Cable Labels Speaker ConfigurationSpeaker Connection Precautions Using a Powered Subwoofer TipAV Cables and Jacks Connecting AV componentsAbout AV Connections Hdmi cableJack Components Assignable Connecting Components with HdmiAudio return channel ARC function Connecting Your Components Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentPlug the power cord into an AC wall outlet Connecting the AntennasConnecting the Power Cord North AmericanTurning Off Turning On/Off the AV ReceiverTurning On AV receiver comes on, the display lightsPlaying the Connected Component Controlling Contents of USB or Network DevicesPlayback Playing an iPod/iPhone via USB Standard Mode controlUnderstanding Icons on the Display Listening to Internet Radio Extended Mode controlPlaying a USB Device Listening to vTuner Internet RadioTop menu of Internet Radio Listening to Other Internet RadioRegistering My Favorites*1 Using Remote Playback Windows Media Player 11 SetupWindows Media Player 12 Setup Playing Music Files on a ServerAuto tuning mode Using the TunerTuning into Radio Stations Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American and Taiwan modelsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Measurement procedure Using Basic FunctionsUsing the Automatic Speaker Setup Error Messages Changing the Speaker Setup ManuallyUsing a Powered Subwoofer Using the Listening Modes Selecting Listening ModesInput Source About Listening ModesExplanatory Notes Speaker LayoutOnkyo-Original DSP Listening Modes Listening ModesDolby Digital Resolution AudioDolby EX Dolby Digital Plus *3That fully envelops the listener Listening Mode Description Input Speaker Source Layout Neo6Use this mode with any stereo movie e.g., TV, DVD, VHS Neo6 CinemaDisplaying Source Information Using the Home Menu Using the Sleep TimerSetting the Display Brightness Changing the Input Display Using the Music OptimizerUsing Headphones Muting the AV ReceiverRecording Separate AV Sources Common Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Digital Audio Digital Audio Input Hdmi InputComponent Component Video Input Explanatory NotesSp Config Speaker Configuration Level Cal Level Calibration Sp Distance Speaker DistanceDolby Audio AdjustMultiplex/Mono Audyssey Source SetupTheater-Dimensional Sync Preset Name For Input SelectorDynamic Volume SyncHardware Setting the Incoming Digital Signal Fixed ModeRemote Control Audio SelectorTuner Auto StandbyHdmi Through Hdmi SetupHdmi Ctrl Rihd Audio TV OutNetwork Setup Tone Control UpdateUsing the Audio Settings Speaker LevelsCinemaFILTER Late Night FunctionMusic Optimizer Zone Connecting the Zone Speakers to an Additional AmplifierOperating on the remote controller Making Zone 2 ConnectionsUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Controlling Your iPod/iPhone RI DockAvailable buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller Controlling a TVNumber +10 Cassettetape deckTV VOL q/w CH + Disc +Audio TroubleshootingPower Video UP-A1 Dock for iPod/iPhone Remote ControllerTuner Zone USB Device PlaybackRecording Music Server and Internet RadioVideo Atton Gain is reduced by 2 dB Video Attoff defaultVideo Attenuation Network Requirements Network/USB FeaturesConnecting to the Network Server RequirementsAbout Dlna USB Device RequirementsSupported Audio File Formats Updating the Firmware via Network Firmware UpdateUpdate procedure Before you startError Code Description TroubleshootingErrors during an update via Network CaseUpdating the Firmware via USB Europe Errors during an update via USBAmericas China, Hong KongAudio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the settings How to connect and setupConfirm the connection and settings Operate with the remote controllerVideo Section SpecificationsAmplifier Section Tuner SectionMemo 4 0 0 5 7 1 a
Related manuals
Manual 2 pages 12.24 Kb

TX-NR509 specifications

The Onkyo TX-NR509 and HT-S6405 combination presents an impressive entry point into the world of home theater systems, delivering remarkable audio performance and convenient features for the everyday user. The TX-NR509 is a powerful 7.1-channel AV receiver that boasts a rich assortment of technologies designed to elevate movie and music experiences.

One of the most notable features of the TX-NR509 is its ability to handle high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats ensure that soundtracks are delivered with impeccable clarity and depth, making them a perfect pairing for a high-definition viewing experience. Additionally, the receiver supports various audio formats, including FLAC and WAV, providing full compatibility with lossless audio files and ensuring audiophiles can enjoy their favorite tracks without degradation.

In terms of connectivity, the TX-NR509 is equipped with six HDMI inputs, allowing users to connect multiple devices easily, including Blu-ray players, gaming consoles, and streaming devices. One HDMI output supports Audio Return Channel functionality, streamlining the connection between TV and receiver and enhancing convenience, particularly for late-night TV viewing.

The HT-S6405 complements the TX-NR509 by including a complete 5.1 speaker package designed to create a comprehensive surround sound experience. The compact satellite speakers and an impressive subwoofer work harmoniously to deliver a balanced soundstage with deep bass and crisp highs. The subwoofer, with its dedicated amplifier, ensures that the low frequencies resonate richly, perfect for both action-packed movies and subtle musical nuances.

The combination also features Onkyo's proprietary AccuEQ technology, which offers room calibration for optimizing audio settings based on the unique acoustics of any space. This ensures that users experience sound that is well balanced and tailored to their environment.

Supporting the latest in streaming capabilities, the TX-NR509 includes built-in internet radio and streaming via vTuner, as well as USB connectivity for easy access to digital music files from various sources. With its user-friendly interface, setting up this system is straightforward, making it a fantastic option for users who want high-quality sound without a complicated setup process.

In summary, the Onkyo TX-NR509 and HT-S6405 offer a remarkable blend of technology, sound performance, and user-centric features, making it an excellent choice for a home theater setup. Its combination of high-definition audio support, seamless connectivity, and advanced calibration technology positions it as a reliable option for enhancing entertainment at home.
Top Page Image Contents