Onkyo TX-NR509 Video Attenuation, Video Attoff default, Video Atton Gain is reduced by 2 dB

Page 63

When performing “Automatic Speaker Setup”, the measurement fails showing the message “Ambient noise is too high.”

This can be caused by any malfunction in your

speaker unit. Check if the unit produces normal

 

sounds.

 

The following settings can be made for the composite video inputs

You must use the buttons on the unit to make these settings.

On the AV receiver, press the input selector for the input source that you want to set and the SETUP button simultaneously. While holding down the input selector button, press SETUP until “Video ATT:ON” appears on the display. Then, release both buttons. To reactivate the setting, repeat the above process so that “Video ATT:OFF” appears on the display, and release the buttons.

• Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT, GAME, or AUX input.

If you have a game console connected to the composite video input, and the picture isn’t very clear, you can attenuate the gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain is reduced by 2 dB.

If the picture on your TV/monitor connected to HDMI OUT is unstable, try switching the DeepColor function off

To turn off the DeepColor function, simultaneously press the CBL/SAT and 8ON/STANDBY buttons on the AV receiver. While holding down CBL/SAT, press 8ON/STANDBY until “Off” appears on the display. Then, release both buttons. To reactivate the DeepColor function, repeat the above process until “On” appears on the display and release the buttons.

The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

Before disconnecting the power cord from the wall outlet, set the AV receiver to Standby.

En

63

Image 63
Contents TX-NR509 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesTemperature protection operates if the apparatus Attain an abnormal high temperaturePrecautions Aiming the remote controller Supplied AccessoriesMake sure you have the following accessories Installing the batteriesContents Processing FeaturesPure Audio Mode European, Australian and Asian models AmplifierFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayComposite video and analog audio jacks Remote Control jackSee Connecting the AV Receiver for connection pages 11 to Rear PanelControlling the AV Receiver Remote ControllerScrew-type speaker terminals Connecting the AV ReceiverConnecting Your Speakers Connecting the Speaker CablesSpeaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Tip Using a Powered SubwooferHdmi cable Connecting AV componentsAbout AV Connections AV Cables and JacksConnecting Components with Hdmi Audio return channel ARC functionJack Components Assignable Jack/Port Components Assignable Connecting Your ComponentsConnecting a Recording Component Connecting Onkyo uComponentsNorth American Connecting the AntennasConnecting the Power Cord Plug the power cord into an AC wall outletAV receiver comes on, the display lights Turning On/Off the AV ReceiverTurning On Turning OffControlling Contents of USB or Network Devices PlaybackPlaying the Connected Component Standard Mode control Understanding Icons on the DisplayPlaying an iPod/iPhone via USB Listening to vTuner Internet Radio Extended Mode controlPlaying a USB Device Listening to Internet RadioListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Playing Music Files on a Server Windows Media Player 11 SetupWindows Media Player 12 Setup Using Remote PlaybackListening to AM/FM Radio Using the TunerTuning into Radio Stations Auto tuning modeUsing RDS excluding North American and Taiwan models Presetting AM/FM StationsDisplaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure Changing the Speaker Setup Manually Error MessagesUsing a Powered Subwoofer Selecting Listening Modes Using the Listening ModesSpeaker Layout About Listening ModesExplanatory Notes Input SourceListening Modes Onkyo-Original DSP Listening ModesDolby Digital Plus *3 Resolution AudioDolby EX Dolby DigitalNeo6 Cinema Listening Mode Description Input Speaker Source Layout Neo6Use this mode with any stereo movie e.g., TV, DVD, VHS That fully envelops the listenerUsing the Home Menu Using the Sleep Timer Setting the Display BrightnessDisplaying Source Information Muting the AV Receiver Using the Music OptimizerUsing Headphones Changing the Input DisplayRecording Separate AV Sources Advanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Explanatory Notes Hdmi InputComponent Component Video Input Digital Audio Digital Audio InputSp Config Speaker Configuration Sp Distance Speaker Distance Level Cal Level CalibrationAudio Adjust Multiplex/MonoDolby Source Setup Theater-DimensionalAudyssey Sync Preset Name For Input SelectorDynamic Volume SyncAudio Selector Setting the Incoming Digital Signal Fixed ModeRemote Control HardwareAuto Standby TunerAudio TV Out Hdmi SetupHdmi Ctrl Rihd Hdmi ThroughNetwork Setup Speaker Levels UpdateUsing the Audio Settings Tone ControlLate Night Function Music OptimizerCinemaFILTER Making Zone 2 Connections Connecting the Zone Speakers to an Additional AmplifierOperating on the remote controller ZoneUsing the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock RI Dock Controlling Your iPod/iPhoneAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling a TV Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsCH + Disc + Cassettetape deckTV VOL q/w Number +10Troubleshooting PowerAudio Video Remote Controller TunerUP-A1 Dock for iPod/iPhone Music Server and Internet Radio USB Device PlaybackRecording ZoneVideo Attoff default Video AttenuationVideo Atton Gain is reduced by 2 dB Server Requirements Network/USB FeaturesConnecting to the Network Network RequirementsUSB Device Requirements Supported Audio File FormatsAbout Dlna Before you start Firmware UpdateUpdate procedure Updating the Firmware via NetworkCase TroubleshootingErrors during an update via Network Error Code DescriptionUpdating the Firmware via USB China, Hong Kong Errors during an update via USBAmericas EuropeConnection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection Operate with the remote controller How to connect and setupConfirm the connection and settings Confirm the settingsTuner Section SpecificationsAmplifier Section Video SectionMemo 4 0 0 5 7 1 a
Related manuals
Manual 2 pages 12.24 Kb

TX-NR509 specifications

The Onkyo TX-NR509 and HT-S6405 combination presents an impressive entry point into the world of home theater systems, delivering remarkable audio performance and convenient features for the everyday user. The TX-NR509 is a powerful 7.1-channel AV receiver that boasts a rich assortment of technologies designed to elevate movie and music experiences.

One of the most notable features of the TX-NR509 is its ability to handle high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats ensure that soundtracks are delivered with impeccable clarity and depth, making them a perfect pairing for a high-definition viewing experience. Additionally, the receiver supports various audio formats, including FLAC and WAV, providing full compatibility with lossless audio files and ensuring audiophiles can enjoy their favorite tracks without degradation.

In terms of connectivity, the TX-NR509 is equipped with six HDMI inputs, allowing users to connect multiple devices easily, including Blu-ray players, gaming consoles, and streaming devices. One HDMI output supports Audio Return Channel functionality, streamlining the connection between TV and receiver and enhancing convenience, particularly for late-night TV viewing.

The HT-S6405 complements the TX-NR509 by including a complete 5.1 speaker package designed to create a comprehensive surround sound experience. The compact satellite speakers and an impressive subwoofer work harmoniously to deliver a balanced soundstage with deep bass and crisp highs. The subwoofer, with its dedicated amplifier, ensures that the low frequencies resonate richly, perfect for both action-packed movies and subtle musical nuances.

The combination also features Onkyo's proprietary AccuEQ technology, which offers room calibration for optimizing audio settings based on the unique acoustics of any space. This ensures that users experience sound that is well balanced and tailored to their environment.

Supporting the latest in streaming capabilities, the TX-NR509 includes built-in internet radio and streaming via vTuner, as well as USB connectivity for easy access to digital music files from various sources. With its user-friendly interface, setting up this system is straightforward, making it a fantastic option for users who want high-quality sound without a complicated setup process.

In summary, the Onkyo TX-NR509 and HT-S6405 offer a remarkable blend of technology, sound performance, and user-centric features, making it an excellent choice for a home theater setup. Its combination of high-definition audio support, seamless connectivity, and advanced calibration technology positions it as a reliable option for enhancing entertainment at home.