Onkyo TX-L55 instruction manual Connecting Speakers, Connecting the Front Speaker Cables

Page 16

TX-L55_En.book Page 16 Tuesday, June 1, 2004 9:02 AM

Connecting Speakers

Connecting Speakers

Before you connect your speakers, read the following:

•Disconnect the power cord from the wall outlet.

•Read the instructions supplied with your speakers.

•Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive

(+) terminals, and negative (–) terminals only to nega- tive (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound odd.

•Only use speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower imped- ance, and use the amplifier at high volume levels for a long period of time, the built-in protection circuit may be activated.

•Unnecessarily long or very thin speaker cables may affect the sound quality and should be avoided.

•Be careful not to short the posi-

tive and negative connections. Doing so may damage the TX-L55.

• Don’t connect more than one cable to each speaker terminal. Doing so may damage the TX-L55.

•If you want to connect a single speaker instead of a pair, connect it to either the left or right speaker termi- nals, not both.

R

L

R

L

Connecting the Front Speaker Cables

1

Strip 5/8" (15 mm) of

5/8" (15 mm)

 

insulation from the

 

 

ends of the speaker

 

 

cables, and twist the

 

 

bare wires tightly, as

 

 

shown.

 

2

Unscrew the terminal. Fully insert the bare

 

wires. Screw the terminal tight.

Connecting the Other Speaker Cables

1

Strip 3/8" (10 mm) of

3/8" (10 mm)

insulation from the ends of the speaker cables, and twist the bare wires tightly.

2 While pushing the lever, insert the wire into the hole, and then release the lever.

Maker sure that the speaker connectors are gripping the bare wires, not the insulation.

Attaching the Speaker Labels

The TX-L55’s positive (+) speaker terminals are color- coded for ease of identification. (The negative (–) speaker terminals are all black.)

Speaker terminal

Color

Front left

White

 

 

Front right

Red

 

 

Center

Green

 

 

Surround left

Blue

 

 

Surround right

Gray

 

 

Surround back

Brown

 

 

The supplied speaker labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the above table.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TX-L55 Important Safety Instructions AvisPower PrecautionsIf in any doubt, consult a qualified electrician Supplied Accessories PrecautionsMake sure you have the following accessories FCC Information for UserFeatures Table of Contents Installing the Batteries Before Using the TX-L55Using the Remote Controller Front & Rear Panels Front PanelFront & Rear Panels Display Front & Rear Panels Rear PanelRemote Controller AMP/TUNER ModeDVD Mode Remote ControllerTo select DVD mode, press the Remote Mode DVD button SETUP/GUIDE button On buttonNumber buttons TOP Menu buttonTV Mode Enjoying Home Theater About Home TheaterSpeaker Configuration Connecting Speakers Connecting SpeakersConnecting the Front Speaker Cables Connecting the Other Speaker CablesConnecting Speakers Connecting Antenna Connecting an Outdoor FM AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting Antenna As shown Using your fingernails or a small screwOhm coaxial cable Insert the central conductor 1, asConnecting AV Components Before Making Any ConnectionsAV Cables & Sockets Optical Digital InputsConnecting AV Components Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsMonitor Out Connecting Your TV or ProjectorAudio Connections Connecting Your DVD player Using Component VideoVideo Connections Your TV must also be connected via S-VideoConnecting a VCR for Playback You can watch videos by connecting your VCR to the TX-L55DVD Multichannel Connection VCRConnecting a VCR for Recording Connecting a D-VHS VCR for PlaybackVHS VCR Set-top box satellite Cable, over-the-air, LD player, etc Connecting a CD Player Connecting a CD, MiniDisc, DAT, or Cassette RecorderConnecting a Turntable Turntable without a Built-in Phono PreampTurntable with a Built-in Phono Preamp Turntable with an MC Moving Coil CartridgeConnecting the Power Cord Connecting an Onkyo DVD Player withTurning On the TX-L55 Basic Setup Speaker SetupSpeaker Detection Speaker Level Calibration Test ToneDigital Audio Input Setup Basic SetupAssigning Inputs to Input Sources Component Video Input Setup Master Volume Input Selector Basic OperationSelecting the Input Source Start playback on the source componentBasic Operation Setting the Display BrightnessMuting the TX-L55 Using the Sleep Timer Using HeadphonesTuning on the TX-L55 Tuning with the Remote ControllerListening to the Radio Presetting Radio Stations Selecting Preset StationsDeleting Presets Displaying Radio InformationUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the TX-L55Using the Listening Modes Use this mode with video games that feature stereo soundAbout the Listening Modes Basic ModesOnkyo Original DSP Modes Listening Mode IndicatorsDTS-ES What to Do If You Can’t Select a Listening Mode Input Signal Formats & Listening ModesAbout the Speakers necessary Column Dolby Digital/DTS Setting Or 6.1-channel Playback Use the Up and Down Buttons to select Surr Bk,Using the Late Night Function Dolby Digital only Adjusting Speaker LevelsUsing the CinemaFILTER Advanced OperationUsing the DVD Multichannel Input Advanced OperationOther Digital Input Signals Analog Input SignalsPCM Input Signals Displaying Source InformationRecording from Separate AV Sources RecordingRecording the Current Input Source Advanced Setup Speaker Setup AdvancedAdvanced Setup Crossover FrequencySpeaker Distance Setting the Audio Input Format Input Source Audio SetupSetting the Digital Input Format Audio Adjust Functions Adjusting the Bass & TrebleUsing the Other Audio Adjust Functions DTS Neo6 Music Mode & Audio AdjustPL II & PL IIx Music Modes & Audio Adjust DimensionPanrma Panorama Width Center WidthControlling Other Components Entering Remote Control CodesCodes for Onkyo DVD Players Remote Control Codes Controlling Other ComponentsTX-L55En.book Page 57 Tuesday, June 1, 2004 902 AM Press the same Remote Mode Mode AMP button, pressPress the AMP mode button Press the TV buttonTroubleshooting Troubleshooting Sound changes when I connect my head- phones? Can’t use an audio adjust function?Can’t control other components? Can’t record?Specifications Amplifier SectionVideo Section Tuner SectionOnkyo U.S.A. Corporation Onkyo China Limited

TX-L55 specifications

The Onkyo TX-L55 is a remarkable piece of audio equipment that caters to both audiophiles and casual listeners alike. As a part of Onkyo's renowned lineup of receivers, the TX-L55 is packed with features and technologies that enhance the listening experience while boasting impressive connectivity options.

One of the standout features of the TX-L55 is its 5.2-channel surround sound capability, which allows users to immerse themselves in a truly cinematic audio experience. With an output power of up to 80 watts per channel, the receiver is capable of delivering a rich, dynamic sound whether it is used for music, movies, or gaming. The TX-L55 also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, which further elevate the clarity and depth of the audio playback.

The receiver also incorporates advanced technologies to improve sound quality and enhance the listening experience. One notable technology is Onkyo’s proprietary AccuEQ, which calibrates the audio output to match the acoustics of the room, ensuring optimal sound reproduction. This feature takes into consideration the position of the speakers and the environment, allowing users to enjoy a balanced and immersive soundstage.

Connectivity is another highlight of the Onkyo TX-L55, which features a versatile array of inputs and outputs. It includes multiple HDMI inputs, allowing for easy connection of various sources such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video passthrough, making it a future-proof addition to any home entertainment system.

For those who value convenience, the TX-L55 is equipped with Bluetooth technology, enabling users to stream music wirelessly from their smartphones, tablets, or computers. This feature allows for seamless integration with personal devices, making it easy to enjoy favorite playlists without the hassle of wired connections.

The user-friendly interface of the TX-L55 further enhances its appeal, with an intuitive on-screen menu and remote control that make navigation straightforward. The unit's sleek design fits well into any home theater setup, offering both aesthetic appeal and practical functionality.

In conclusion, the Onkyo TX-L55 stands out as a versatile and feature-rich AV receiver, making it an excellent choice for those seeking high-quality audio performances without compromising on connectivity and user experience. Whether you are watching a movie or hosting a music party, the TX-L55 ensures that every audio moment is enjoyed to its fullest.
Top Page Image Contents