Onkyo TX-L55 Can’t control other components?, Can’t record?, Can’t use an audio adjust function?

Page 61

TX-L55_En.book Page 61 Tuesday, June 1, 2004 9:02 AM

Troubleshooting—Continued

•Make sure that the TX-L55 is not subjected to direct sunshine or inverter-type fluorescent lights. Relocate if necessary.

•If the TX-L55 is installed in a rack or cabinet with col- ored-glass doors, the remote controller may not work reliably when the doors are closed.

•Make sure you’ve selected the correct remote control- ler mode (page 11).

•When using the remote controller to control other manufacturers’ AV components, some buttons may not work as expected.

•Make sure you’ve entered the correct remote control code.

Can’t control other components?

•If it’s an Onkyo DVD player, make sure that the cable and analog audio cable (RCA) are connected

properly. Connecting only an cable won’t work (page 29).

•Make sure you’ve selected the correct remote control- ler mode (pages 11, 12, and 14).

To reset the TX-L55 to its factory defaults, turn it on and, while holding down the [] TUNING button, press the [STANDBY/ON] button. When the reset is complete, “Clear” appears on the display and the TX-L55 enters Standby mode.

Onkyo cannot be held responsible for damages (such as CD rental fees) due to recording failures caused by the unit malfunctioning. Before recording something important, do a trial run to make sure that everything is working properly.

Memory backup

The TX-L55 uses a battery-less memory backup sys- tem in order to retain radio presets and other settings when it’s unplugged or in the case of a power failure.

Although no batteries are required, it must be plugged into an AC outlet in order to charge the backup system. Once it has been charged, the TX-L55 will retain the settings for several weeks, although this depends on the environment and will be shorter in humid climates.

Recording

Can’t record?

•On your recorder, make sure the correct input is selected.

•Digital signals cannot be recorded.

Others

The sound changes when I connect my head- phones?

•When a pair of headphones is connected, the listening mode is set to Stereo, unless it’s already Stereo or Direct. When you disconnect the headphones, the pre- vious listening mode is resumed.

Can’t use an audio adjust function?

•Some audio adjust functions can’t be used with certain listening modes.

The speaker distance cannot be set as required?

•If the distance between the furthest and nearest speak- ers is greater than 20 feet (6 meters), corrected values suitable for home theater use will be set automatically (page 50).

The TX-L55 contains a microcomputer for signal pro- cessing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents TX-L55 Avis Important Safety InstructionsPower PrecautionsIf in any doubt, consult a qualified electrician Precautions Supplied AccessoriesMake sure you have the following accessories FCC Information for UserFeatures Table of Contents Installing the Batteries Before Using the TX-L55Using the Remote Controller Front Panel Front & Rear PanelsFront & Rear Panels Display Rear Panel Front & Rear PanelsAMP/TUNER Mode Remote ControllerDVD Mode Remote ControllerTo select DVD mode, press the Remote Mode DVD button On button SETUP/GUIDE buttonNumber buttons TOP Menu buttonTV Mode Enjoying Home Theater About Home TheaterSpeaker Configuration Connecting Speakers Connecting SpeakersConnecting the Front Speaker Cables Connecting the Other Speaker CablesConnecting Speakers Connecting an Outdoor FM Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelAs shown Using your fingernails or a small screw Connecting AntennaOhm coaxial cable Insert the central conductor 1, asBefore Making Any Connections Connecting AV ComponentsAV Cables & Sockets Optical Digital InputsConnecting Both Audio & Video Connecting AV ComponentsWhich Connections Should I Use? Video Connection FormatsMonitor Out Connecting Your TV or ProjectorAudio Connections Using Component Video Connecting Your DVD playerVideo Connections Your TV must also be connected via S-VideoYou can watch videos by connecting your VCR to the TX-L55 Connecting a VCR for PlaybackDVD Multichannel Connection VCRConnecting a VCR for Recording Connecting a D-VHS VCR for PlaybackVHS VCR Set-top box satellite Cable, over-the-air, LD player, etc Connecting a CD, MiniDisc, DAT, or Cassette Recorder Connecting a CD PlayerTurntable without a Built-in Phono Preamp Connecting a TurntableTurntable with a Built-in Phono Preamp Turntable with an MC Moving Coil CartridgeConnecting the Power Cord Connecting an Onkyo DVD Player withTurning On the TX-L55 Speaker Setup Basic SetupSpeaker Detection Speaker Level Calibration Test ToneDigital Audio Input Setup Basic SetupAssigning Inputs to Input Sources Component Video Input Setup Basic Operation Master Volume Input SelectorSelecting the Input Source Start playback on the source componentBasic Operation Setting the Display BrightnessMuting the TX-L55 Using Headphones Using the Sleep TimerTuning on the TX-L55 Tuning with the Remote ControllerListening to the Radio Selecting Preset Stations Presetting Radio StationsDisplaying Radio Information Deleting PresetsSelecting with the Remote Controller Using the Listening ModesSelecting Listening Modes Selecting on the TX-L55Use this mode with video games that feature stereo sound Using the Listening ModesAbout the Listening Modes Basic ModesOnkyo Original DSP Modes Listening Mode IndicatorsDTS-ES What to Do If You Can’t Select a Listening Mode Input Signal Formats & Listening ModesAbout the Speakers necessary Column Use the Up and Down Buttons to select Surr Bk, Dolby Digital/DTS Setting Or 6.1-channel PlaybackAdjusting Speaker Levels Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER Advanced OperationAdvanced Operation Using the DVD Multichannel InputAnalog Input Signals Other Digital Input SignalsPCM Input Signals Displaying Source InformationRecording from Separate AV Sources RecordingRecording the Current Input Source Speaker Setup Advanced Advanced SetupCrossover Frequency Advanced SetupSpeaker Distance Setting the Audio Input Format Input Source Audio SetupSetting the Digital Input Format Adjusting the Bass & Treble Audio Adjust FunctionsDTS Neo6 Music Mode & Audio Adjust Using the Other Audio Adjust FunctionsDimension PL II & PL IIx Music Modes & Audio AdjustPanrma Panorama Width Center WidthControlling Other Components Entering Remote Control CodesCodes for Onkyo DVD Players Controlling Other Components Remote Control CodesTX-L55En.book Page 57 Tuesday, June 1, 2004 902 AM Mode AMP button, press Press the same Remote ModePress the AMP mode button Press the TV buttonTroubleshooting Troubleshooting Can’t use an audio adjust function? Sound changes when I connect my head- phones?Can’t control other components? Can’t record?Amplifier Section SpecificationsVideo Section Tuner SectionOnkyo China Limited Onkyo U.S.A. Corporation

TX-L55 specifications

The Onkyo TX-L55 is a remarkable piece of audio equipment that caters to both audiophiles and casual listeners alike. As a part of Onkyo's renowned lineup of receivers, the TX-L55 is packed with features and technologies that enhance the listening experience while boasting impressive connectivity options.

One of the standout features of the TX-L55 is its 5.2-channel surround sound capability, which allows users to immerse themselves in a truly cinematic audio experience. With an output power of up to 80 watts per channel, the receiver is capable of delivering a rich, dynamic sound whether it is used for music, movies, or gaming. The TX-L55 also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, which further elevate the clarity and depth of the audio playback.

The receiver also incorporates advanced technologies to improve sound quality and enhance the listening experience. One notable technology is Onkyo’s proprietary AccuEQ, which calibrates the audio output to match the acoustics of the room, ensuring optimal sound reproduction. This feature takes into consideration the position of the speakers and the environment, allowing users to enjoy a balanced and immersive soundstage.

Connectivity is another highlight of the Onkyo TX-L55, which features a versatile array of inputs and outputs. It includes multiple HDMI inputs, allowing for easy connection of various sources such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video passthrough, making it a future-proof addition to any home entertainment system.

For those who value convenience, the TX-L55 is equipped with Bluetooth technology, enabling users to stream music wirelessly from their smartphones, tablets, or computers. This feature allows for seamless integration with personal devices, making it easy to enjoy favorite playlists without the hassle of wired connections.

The user-friendly interface of the TX-L55 further enhances its appeal, with an intuitive on-screen menu and remote control that make navigation straightforward. The unit's sleek design fits well into any home theater setup, offering both aesthetic appeal and practical functionality.

In conclusion, the Onkyo TX-L55 stands out as a versatile and feature-rich AV receiver, making it an excellent choice for those seeking high-quality audio performances without compromising on connectivity and user experience. Whether you are watching a movie or hosting a music party, the TX-L55 ensures that every audio moment is enjoyed to its fullest.
Top Page Image Contents