Mitsubishi Electronics XD200U, SD200U When using the projector in Europe, Compliance Notice

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera- ture accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE IN- STALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power-supply cord, it may cause interfer- ence with radio and television reception.

Use the attached PS/2 adapter cable, USB adapter cable and RGB cable with this equipment so as to keep interference within the limit of a FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN PROJECTOR IS IN THE POWER ON MODE.

When using the projector in Europe

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/ EEC “Low Voltage Directive” as amended by Direc- tive 93/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

WARNING

Use the attached PS/2 adapter cable, USB adapter cable and RGB cable with this equipment so as to keep interference within the limit of a EN55022 Class B. Please follow WARNINGS instructions.

EN – 2

Image 2
Contents SD200 When using the projector in Europe Compliance NoticeContents Important safeguards Do not modify this equipment Do not touch Air outlet grilleNever remove the cabinet If you break or drop the cabinetOverview Terminal boardAbout laser beam Remote controlRear adjustment feet Lamp cover Front adjustment feet Beam Divergence 6m distance about 10mm x 10mm ± 6mmOperation area Using the remote controlBattery installation Screen InstallationOrientation of the projector Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV equipment Speaker output is monoProjector + Personal computer For using MacintoshAbout DDC For Computer 1 in connector Getting ready for projection Adjusting the angle of projectionPreparing the projector for operation Zoom ring To operate projector power onFocus ring Far Near Tele WideAV mute Volume from the speakerTurning off the projector Menu operation Basic operationLamp is off. Use the remote control to turn on Reproducibility When sRGB is ON, Color Matrix can’t be adProjector will be in the stand-by mode when Higher as the number increasesUse to synchronize the projector with PC input signals Use to adjust the horizontal position of the imageUse to adjust the vertical position of the image This will be set automatically to match the input signalColor temperature Picture adjustmentAdjusting the image Color matrixAdjustment from personal computer Real screen display Advanced features for presentationExpand Picture in Picture PinPOperation Mouse remote controlConnection Lamp replacement Interval of the lamp replacementIndicators MaintenanceTroubleshooting Specifications Replacement part Option / Not included in the box ConnectorsDimensional drawings mm What’s included in the boxCGA70 640 x 31.47 70.09 800 x Page 871D349A10 Interface Control projector by using a personal computerControl command diagram ConnectionHow to set the grade Operation commandsVolume commands Control sequenceMenu setting commands Remote commandsReading command diagram Example Display Menu selection bar. is for Ascii codeExample Set the Mute to on