Mitsubishi Electronics LVP-S120A Never remove the cabinet, Do not modify this equipment

Page 5

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owner's Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.

Do not modify this equipment.

It can lead to fire or electric shock.

If you break or drop the cabinet.

Do not keep using this equipment if you break or drop it. Unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the equipment.

Do not face a lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface. Level stable surface only.

Please do not place equipment on unstable surfaces. Do not look into the lens when it is operating. It may hurt your eyes.

Never let children look into the lens when it is on.

Do not turn off the main power abruptly or unplug the projector during operation.

It can lead to lamp breakage, fire, electric shock or other trouble.

Place of installation

For safety sake, refrain from setting the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41°F (+5°C) and +95°F (+35°C)

•Operating humidity: between 30 and 90%

•Never put any heat-producing device under the pro- jector so that the projector does not overheat.

•Do not attach the projector to a place that is un- stable or subject to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing near the projector any cable carrying a large current.

•Place the projector on a solid, vibration free sur- face: otherwise it may fall, causing serious injury to a child or adult, and serious damage to the prod- uct.

•Do not stand the projector: it may fall, causing seri- ous injury and damage to the projector.

•Place the projector within a slope of ±15˚. Slanting the projector more than ±15˚ may cause trouble or explosion of the lamp.

•Do not place the projector near air-conditioning unit or heater to avoid hot air to the exhaust and venti- lation hole of the projector.

ENGLISH

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital appara- tus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Department of Communications.

Changes or modifications not expressly approved by Mitsubishi could void the user's authority to oper- ate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class [A] digital apparatus meets all requirements of the Canadian Interference-Causing Equip- ment Regulations.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents S120 Page Contents Important safeguards Do not modify this equipment Never remove the cabinetIf you break or drop the cabinet Do not face a lens to the sunOverview of the projector Front Lamp lid About laser beam Overview of the remote controlOperation area Battery installationScreen Preparing the projector for operationOrientation of the projector Getting ready for projection Adjusting the angle of projectionGround Terminal Take off the lens capProjector + AV equipment Basic connectionsCables and adapters Projector + DVD playerDesktop computer Projector + IBM PC or IBM PC compatiblesWhen outputting to both a PC monitor and the projector Power BookProjector + Macintosh DesktopNumbers 1 9 correspond to the instruction numbers below To operate projector power onFocus ring Zoom ring Volume from the speakerTurning off the projector Auto Position buttonTo the type of the signal Setting range is different accordingMenu operation Basic operationMenu setting continue Signal Adjustment from personal computer Picture adjustmentCGA70 Still Advanced feature for presentationExpand Setting up the PC-CARD Using the PC-CARDDuring PC-CARD playback, the sound is switched off Removing the PC-CARDPC-CARD Continue Installation of software Advanced feature with PCPCV PC Card Viewer EnvironmentStarting up PCV For Windows Command reference For WindowsRecording the image For Windows Editing the presentation For Windows Recording the image For Macintosh Command referenceStarting up PCV For Macintosh Editing the presentation For Macintosh Connection Mouse remote controlOperation Projector + IBM PC or IBM PC compatiblesReplacement of a light source lamp Life of the lamp How to reset the operation time meterCleaning the air-filter MaintenanceCleaning the projector and the ventilation slots Cleaning the lensProblems Cause Possible Solutions TroubleshootingIndicator Shows Condition Possible Solutions IndicatorsAccessories SpecificationsReplacement parts list S120 Connection Projector + IBM PC or IBM PC compatibles Control this projector by using a personal computerControl sequence Control command diagramInterface Remote commands Operation commandsReading command diagram Color Picture adjustment commandsMitsubishi Electronics AMERICA, INC

LVP-S120A specifications

The Mitsubishi Electronics LVP-S120A is a high-quality projector that has garnered attention for its impressive performance and advanced features, making it an excellent choice for both home theater enthusiasts and professional presentations. This model combines cutting-edge technology with user-friendly capabilities, ensuring an exceptional visual experience.

One of the main features of the LVP-S120A is its impressive brightness level, which is rated at 2,500 ANSI lumens. This allows the projector to deliver clear, vibrant images even in well-lit environments, making it a versatile option for various settings, such as classrooms, conference rooms, or living rooms. Coupled with a high contrast ratio, the projector provides sharp image details and deep blacks, enhancing the overall viewing experience.

The LVP-S120A utilizes LCD technology, which is known for its ability to reproduce accurate color and crisp imagery. This projector supports a native resolution of 800x600 pixels, offering a decent quality for standard presentations and video playback. Additionally, it supports various resolutions, making it compatible with a wide array of content sources, such as laptops, DVD players, and gaming consoles.

Another notable aspect of the LVP-S120A is its lightweight and compact design. Weighing just around 3.5 kilograms, it is highly portable, allowing users to easily transport it from one location to another. This feature is particularly advantageous for business professionals who need to deliver presentations on-site or educators who might move between classrooms.

Networking capabilities are also integrated into the LVP-S120A, which allows for easy connectivity to various devices. This projector is equipped with multiple input options, including HDMI, VGA, and composite video ports. The presence of these ports makes it straightforward to connect to a range of media devices, enhancing its versatility.

In terms of usability, the LVP-S120A is designed with user-friendly controls and provides intuitive settings that allow users to adjust image parameters easily. The remote control adds to the convenience of operation, enabling users to navigate through settings from a distance. Furthermore, the projector features an automatic keystone correction function, ensuring a perfectly aligned image even on tilted surfaces.

Overall, the Mitsubishi Electronics LVP-S120A stands out as a reliable projector that balances portability, ease of use, and impressive visual quality, making it an ideal choice for both personal and professional applications.
Top Page Image Contents