Mitsubishi Electronics LVP-S120A Adjusting the angle of projection, Getting ready for projection

Page 11

Adjusting the angle of projection

Screen on a flat wall with a 90 degree angle to the floor by adjusting two Adjustment feet on the bottom of the projector. If the angle cannot be corrected by them, adjust the height and angle of screen.

screen

Adjustment foot

(up and down)

 

1.Lift the projector to the right angle.

2.Press the release button for angle adjustment to take the Adjustment foot (up and down) out of the pro- jector.

3.Release the button and keep your hands away from the projector.

4.Turn the foot to right or left to adjust for proper angle.

After using the projection,

5.Press the release button to take the projector down slowly with holding it.

When the left and right angles are different Adjust the angles with adjustment feet (right and left), which are on the bottom of the projector. When ship- ping the projector at first, the Adjustment feet are cov- ered with sponge to be parallel on a flat surface. Re- move the sponge to adjust the Adjustment feet lower. Do not lose the sponge.

•Screen on a flat wall with a 90˚ angle to the floor.

•Align projector to produce a full screen display as illustrated on page 10.

•Distance from projector to screen must be compatible with screen size chart on page 10. Note distance from screen chart.

Getting ready for projection

1.Connect the power cord provided to the projector.

2.Connect the power cord to the wall outlet.

Plug in the provided power cord directly.

 

ground

 

 

terminal

ENGLISH

3. Take off the lens cap.

 

 

 

Warning:

•Do not look directly into the lens when projector is “ON”.

•The lens cap is for protecting the lens. If you leave the power on with the cap on, the cap may be warped. Please remove the lens cap when you turn the power on.

•A three-pin grounding type power plug is used with the projector. Do not remove the grounding pin on the power plug. If you are unable to insert the plug into the outlet, contact your electrician to replace your A/C obsolete outlet.

•The supplied power cord is used for 120V only. Never connect to any outlet or power supply having a dif- ferent voltage or frequency. If you connect to the power supply having a different voltage, please use the appropriate power cord.

•Do not place an object on the power cord and keep the projector away from heat source to avoid break- ing the power cord. A broken power cord can cause fire or electric shock.

•Do not revise or alter the power cord otherwise it may cause fire or electric shock.

Contact your dealer if the cord is broken.

Caution:

•Plug in firmly and unplug by holding the plug, not by pulling the cable out.

•Do not plug in or out with wet hands. It may cause an electric shock.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents S120 Page Contents Important safeguards Do not face a lens to the sun Never remove the cabinetDo not modify this equipment If you break or drop the cabinetOverview of the projector Front Lamp lid About laser beam Overview of the remote controlOperation area Battery installationScreen Preparing the projector for operationOrientation of the projector Take off the lens cap Adjusting the angle of projectionGetting ready for projection Ground TerminalProjector + DVD player Basic connectionsProjector + AV equipment Cables and adaptersDesktop computer Projector + IBM PC or IBM PC compatiblesDesktop Power BookWhen outputting to both a PC monitor and the projector Projector + MacintoshNumbers 1 9 correspond to the instruction numbers below To operate projector power onAuto Position button Volume from the speakerFocus ring Zoom ring Turning off the projectorBasic operation Setting range is different accordingTo the type of the signal Menu operationMenu setting continue Signal Adjustment from personal computer Picture adjustmentCGA70 Still Advanced feature for presentationExpand Removing the PC-CARD Using the PC-CARDSetting up the PC-CARD During PC-CARD playback, the sound is switched offPC-CARD Continue Environment Advanced feature with PCInstallation of software PCV PC Card ViewerStarting up PCV For Windows Command reference For WindowsRecording the image For Windows Editing the presentation For Windows Recording the image For Macintosh Command referenceStarting up PCV For Macintosh Editing the presentation For Macintosh Projector + IBM PC or IBM PC compatibles Mouse remote controlConnection OperationReplacement of a light source lamp Life of the lamp How to reset the operation time meterCleaning the lens MaintenanceCleaning the air-filter Cleaning the projector and the ventilation slotsProblems Cause Possible Solutions TroubleshootingIndicator Shows Condition Possible Solutions IndicatorsAccessories SpecificationsReplacement parts list S120 Connection Projector + IBM PC or IBM PC compatibles Control this projector by using a personal computerControl sequence Control command diagramInterface Remote commands Operation commandsReading command diagram Color Picture adjustment commandsMitsubishi Electronics AMERICA, INC

LVP-S120A specifications

The Mitsubishi Electronics LVP-S120A is a high-quality projector that has garnered attention for its impressive performance and advanced features, making it an excellent choice for both home theater enthusiasts and professional presentations. This model combines cutting-edge technology with user-friendly capabilities, ensuring an exceptional visual experience.

One of the main features of the LVP-S120A is its impressive brightness level, which is rated at 2,500 ANSI lumens. This allows the projector to deliver clear, vibrant images even in well-lit environments, making it a versatile option for various settings, such as classrooms, conference rooms, or living rooms. Coupled with a high contrast ratio, the projector provides sharp image details and deep blacks, enhancing the overall viewing experience.

The LVP-S120A utilizes LCD technology, which is known for its ability to reproduce accurate color and crisp imagery. This projector supports a native resolution of 800x600 pixels, offering a decent quality for standard presentations and video playback. Additionally, it supports various resolutions, making it compatible with a wide array of content sources, such as laptops, DVD players, and gaming consoles.

Another notable aspect of the LVP-S120A is its lightweight and compact design. Weighing just around 3.5 kilograms, it is highly portable, allowing users to easily transport it from one location to another. This feature is particularly advantageous for business professionals who need to deliver presentations on-site or educators who might move between classrooms.

Networking capabilities are also integrated into the LVP-S120A, which allows for easy connectivity to various devices. This projector is equipped with multiple input options, including HDMI, VGA, and composite video ports. The presence of these ports makes it straightforward to connect to a range of media devices, enhancing its versatility.

In terms of usability, the LVP-S120A is designed with user-friendly controls and provides intuitive settings that allow users to adjust image parameters easily. The remote control adds to the convenience of operation, enabling users to navigate through settings from a distance. Furthermore, the projector features an automatic keystone correction function, ensuring a perfectly aligned image even on tilted surfaces.

Overall, the Mitsubishi Electronics LVP-S120A stands out as a reliable projector that balances portability, ease of use, and impressive visual quality, making it an ideal choice for both personal and professional applications.
Top Page Image Contents