FEATURES23&4FUNCTIONS5 78
FRONT PANEL
FEED&CUTRESET | COPY | 9BA | C |
1POWER BUTTON(INDICATOR) | 8COPY BUTTON |
Press to turn on power. Press again to turn off power. | When pressing this button, the memorized data will be |
2When the power is turned on, the indicator illuminates. | 9printed. |
ALARM INDICATOR | PRINT OUTLET |
When this unit is overheated, this lamp flashes. When other | The printed paper comes out here. |
3errors occur, the LED is steady. See page 17. | ADo not put any objects in front of the outlet. |
PRECAUTIONS |
FEATURES |
CONNECTIONS |
PREPARATION |
SHEET ERROR INDICATOR
When an error concerning ink sheet occurs, this indicator
4lights up or blinks.
PAPER ERROR INDICATOR
When an error concerning print paper occurs, this indicator
5lights up or blinks.
DATA INDICATOR
Indicator blinks during data transfer. It is steady while
6printing and during feed&cut function.
FEED&CUT BUTTON
Pressing this button, the print paper is fed and cut. And
7the mechanism will be initialized.
RESET BUTTON
Reset the print count to 1 when this button and 6 FEED&CUT button are pressed together.
OPEN BUTTON
Press to slide out the printing mechanism. Make sure to unlock CPRINTING UNIT LOCK SWITCH. Reset the power if this button does not open the printing mechanism. Then try to press this button again.
Open the mechanism to load paper and ink cassette or to
Bclear a paper jam.
TRAY
Hold the printed image that comes out of the print outlet. Press down and pull the knob to extend the tray. Make
Csure to fully extend the tray for proper use.
PRINTING MECHANISM LOCK SWITCH
Locks the printing mechanism.
Shift the switch to the left (LOCK side) to lock and to the right (UNLOCK side) to unlock.
This mechanism is locked when shipping. When transporting this unit, make sure to lock the mechanism.
SHOOTING | TROUBLE- |
|
|
| OTHERS |
7