Mitsubishi Electronics CPK60DWS operation manual Information, Contents

Page 2

INFORMATION

This Class A digital apparatus complies with Canadian ICES-003.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception. If you use other cables, it may cause interference with radio and television reception.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute the risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The “Caution, hot surface” symbol indicates that the marked item may be hot and should not be touched.

The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including equipment malfunction) due to static electricity may occur in certain conditions.

The “OFF/ON” symbol indicates connection to or disconnection from the mains, at least for mains switches.

The “Alternating current” symbol indicates that the equipment is suitable for alternating current only.

PRECAUTIONS FEATURES PREPARATION TROUBLE- OTHERS

SHOOTING

CONTENTS

Image 2
Contents CP-K60DW-S Contents InformationContents Contents Safety Precautions Protective MeasuresFor Long Operating Life Safety PrecautionsInstallation Locations TROUBLE-SHOOTING Others Contents Other CautionsSpecial Features Special FeaturesCarefully pull the printer up and out of the box UnpackingUnpacking Unwrap the packingFeatures and Functions Front PanelFeatures and Functions Rear PanelBefore Operation Printer Setup ProcedureBefore printing, follow the printer setup listed below Before Operation Positioning of Adjustable Paper GuideHOW to SET the Adjustable Paper Guides Print Paper Installation Precautions Features PreparationClose the door Install the print paper into the unitDoor INK Ribbon Installation Load the ink ribbon in the ink cassette as shown belowPush the printing unit to close After Printing Handling of Paper / INK Ribbon SETBefore Printing Storage of Paper / INK Ribbon SETConnection with USB Data Signal Equipment Connecting to Personal Computer ExampleError Messages and Countermeasures Indications on the Front Panel and CountermeasuresPress the Open button to open the printing unit Error Messages and CountermeasuresOvercoming Paper Jams Remove the print paperRepairing a Torn INK Ribbon Use the original packaging Before Calling for ServiceInstructions for Transportation Close the printing unit firmlyThermal Head Cleaning CleaningFilter Cleaning Paper Flange Cleaning CleaningPlaten Roller Cleaning Contents of CD-ROM SpecificationsSpecifications Mitsubishi Electric Europe B.V