Mitsubishi Electronics CPK60DWS operation manual Features and Functions, Front Panel

Page 10

FEATURES AND FUNCTIONS

FRONT PANEL

6

5

4

3

2

1

8

PAPER STRIP BIN

Holds the paper strips generated by margin cut. Empty the bin frequently to prevent jamming the strips at the print outlet.

NOTE

Remove the bin before opening the door. If the door is opened with this bin attached, the printer or this bin may be damaged. Do not remove the bin during printing. It may cause a malfunction.

CONNECTOR COVER

Do not open the cover during normal use.

ALARM INDICATOR ()

This indicator illuminates or blinks when a paper jam occurs or the door is open. See page 17.

PAPER RIBBON INDICATOR ()

When an error concerning the ink ribbon or print paper occurs, this indicator illuminates or blinks. See page 17.

OPENING THE DOOR

Pull out the printing unit by pressing the OPEN button and then pull the knob to open the door.

Knob

7

8

9

POWER INDICATOR ()

When the power is turned on, the indicator illuminates. It normally illuminates green, however, blinks or illuminates orange depending on the printer status. See page 17.

PRINT OUTLET

The printed paper comes out here.

OPEN BUTTON ()

Press to release the printing unit out.

PRINTING UNIT

Open to load print paper or ink ribbon. Press the OPEN button to release the printing unit.

DOOR

Open the door to mount print paper.

PAPER STRIP BIN

Hook and pull up the paper strip bin to attach it firmly. Hold and pull the handle on the lower part of paper strip bin to remove.

12

PRECAUTIONS FEATURES PREPARATION TROUBLE- OTHERS

SHOOTING

CONTENTS

Printing unit

Door

7

Image 10
Contents CP-K60DW-S Contents InformationContents Contents Safety Precautions Protective MeasuresInstallation Locations Safety PrecautionsFor Long Operating Life TROUBLE-SHOOTING Others Contents Other CautionsSpecial Features Special FeaturesCarefully pull the printer up and out of the box UnpackingUnpacking Unwrap the packingFeatures and Functions Front PanelFeatures and Functions Rear PanelBefore printing, follow the printer setup listed below Printer Setup ProcedureBefore Operation HOW to SET the Adjustable Paper Guides Positioning of Adjustable Paper GuideBefore Operation Print Paper Installation Precautions Features PreparationDoor Install the print paper into the unitClose the door INK Ribbon Installation Load the ink ribbon in the ink cassette as shown belowPush the printing unit to close After Printing Handling of Paper / INK Ribbon SETBefore Printing Storage of Paper / INK Ribbon SETConnection with USB Data Signal Equipment Connecting to Personal Computer ExampleError Messages and Countermeasures Indications on the Front Panel and CountermeasuresPress the Open button to open the printing unit Error Messages and CountermeasuresOvercoming Paper Jams Remove the print paperRepairing a Torn INK Ribbon Use the original packaging Before Calling for ServiceInstructions for Transportation Close the printing unit firmlyFilter Cleaning CleaningThermal Head Cleaning Platen Roller Cleaning CleaningPaper Flange Cleaning Specifications SpecificationsContents of CD-ROM Mitsubishi Electric Europe B.V