Mitsubishi Electronics FFT9905SKJHFW manual Ddc, Location Considerations, Cleaning Your Monitor

Page 9

1.4DDC

The monitor includes the DDC1 and DDC2B feature. DDC (Display Data Channel) is a communi- cation channel over which the monitor automatically informs the host system about its capabilities (e.g. each supported resolution with its corresponding timing).

DDC is routed through previously unused pins of the 15-pin VGA connector.

The system will perform "Plug and Play" feature if both, monitor and host, implement the DDC protocol.

1.5Location Considerations

When setting up and using the monitor, keep the following in mind:

*For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor; place the monitor just below eye level.

*Place the monitor away from strong magnetic or electromagnetic fields, such as high capacity transformers, electric motors, large current power lines, steel pillars, etc.... Magnetism can cause distortion in the picture and/or color purity.

*Avoid covering the slots or openings of the monitor. Allow adequate ventilation

around the monitor so the heat from the monitor can properly dissipate. Avoid putting the monitor into any enclosure that does not have adequate ventilation.

*Avoid exposing the monitor to rain, excessive moisture, or dust, as this can cause a fire or shock hazard.

*Avoid placing the monitor, or any other heavy object, on the power cord. Damage to the power cord can cause a fire or electrical shock.

*When transporting the monitor, handle it with care.

CAUTION

Keep your fingers away from the pivot area of the tilt/swivel base.

1.6Cleaning Your Monitor

When cleaning the monitor, please follow these guidelines:

*Always unplug the monitor before cleaning.

*Wipe the screen and cabinet front and sides with a soft cloth.

*If the screen requires more than dusting, apply a household window cleaner to a soft cloth to clean the monitor screen.

CAUTION

Do not use benzene, thinner or any volatile substances to clean the unit as the finish may be permanently marked. Never leave the monitor in contact with rubber or vinyl for an extended time period.

8

Image 9
Contents Mitsubishi Trademark Manufacturer Declaration for CE-MARKING Radio Interference Regulations Statement for U.S.AWhy do we have environmentally-labelled computers? Environmental Requirements Contents Introduction FeaturesPower Management Function Internal Preset Memory CapabilityStand-by mode Suspend modeCleaning Your Monitor DDCLocation Considerations Screen Position Adjustment UnpackingTilt/Swivel Base Function Controls Quick Operation ChartAC Power Connection Connecting the MonitorSignal Cable Connection Connecting to Any IBM VGA Compatible SystemConnecting to a Unix Workstation & Third Party Graphics Card Case of External Composite Sync Signal Case of Separate Horizontal and Vertical Sync SignalsBNC Connection User Controls Control NamesFunction DIN-8P Serial Interface Connector Signal Input Connector BNCPOSI, SIDE-BOW, KEY STONE, PIN-BALANCE, KEY-BALANCE OSDOn Screen Display FunctionsOperation Indicate input connector Frequency of input signalSize PhasePosition SIDE-BOWPIN-BALANCE KeystoneKEY-BALANCE MoirePOWER-SAVE Geometry ResetRotation VIDEO-LEVELUSB Port Select Adjust LockPower Save is OFF Power SavePower Save is on Power Save is on or OFFProblem Items to Check Location TroubleshootingLED BNCSpecifications Appendix Monitor Signal Input Connector DB9-15PSC-B102 Signal Cable 21Multimode Macintosh Adapter AD-A205 settings17Multimode 13Multimode3,4 AD-A205 Mac Adapter settings ChartCP871C144A90