Mitsubishi Electronics 1554R user manual Safety Instructions for Display Monitors

Page 6

Safety Instructions for Display Monitors

1.The AC plug isolates this equipment from the AC Power supply.

2.Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3.Slots and openings in the cabinet and the back or bottom are provided for ventilation. They must not be blocked or covered. This computer monitor should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

4.This monitor must be operated from the type of power indicated on the rating label. If you are not sure of the type of power available, consult your dealer or local power company.

5.This monitor must be operated with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to make the necessary outlet changes.

6.Never push objects of any kind, or spill liquid of any kind into the monitor.

7.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any above mentioned misuse or other accident (such as dropping, mis-operation) occurs, contact qualified service personnel for servicing.

8.Use only the proper type of power supply cord set (provided in your monitors box) for this unit. It should be a detachable type with approved cable and connectors for use in Australia and New Zealand.

9.The power socket outlet shall be near the equipment and shall be easily accessible.

ii

Image 6
Contents 1554R Page Table of Contents Page Copyright Disclaimer Monitor InformationDealer Information Safety Instructions for Display Monitors Maintenance Page Features IntroductionUnpacking the Package Mode Power Consumption Horizontal Power ManagementPower Saving Function Green CommitmentInstalling the Monitor Getting StartedConnecting through D-SUB signal connector Adjusting the Monitor Control FunctionsSelect / Adjust Timing SettingFactory Preset Timings Troubleshooting and 4 Useful Hints TroubleshootingNeed More Help? AustraliaNew Zealand Specifications