Mitsubishi Electronics EW270U user manual Connecting an S-Video source device

Page 19

The final connection path should be like that shown in the following diagram:

Audio cable (option)

Component Video to

 

RGB (D-Sub) adaptor

or

cable (option)

AV device

Speakers

Audio cable (option)

ENGLISH

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output socket available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video source device:

1.Take an S-Video cable and connect one end to the S-Video output socket of the Video source device.

2.Connect the other end of the S-Video cable to the S-VIDEOsocket on the projector.

3.If you wish to make use of the projector speaker in your presentations, take a suitable audio cable and connect one end of the cable to the audio output jack of the computer, and the other end to the AUDIO IN jack of the projector.

4.If you wish, you can use another suitable audio cable and connect one end of the cable to the AUDIO OUT jack of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting

the sound" on page 33 for details.

The final connection path should be like that shown in the following diagram:

Speakers

S-Video cable (option)

Audio cable (option)

 

Audio cable

AV device

(option)

 

• If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

•If you have already made a Component Video connection between the projector and this S-Video source device, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. See "Connecting Video source devices" on page 17 for details.

EN-19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents EX240U/EW270U Shock EN-3 Contents Important safeguards Compliance Notice of Industry Canada Kensington Lock Projector exterior viewProjector Controls and functionsMagnifying and searching for details on page 26 for Remote controlRemote control effective range Choosing a location Positioning your projectorObtaining a preferred projected image size When fine streaks are seen on projected imagesEN-13 Front projection Layout of the projectorStandard EX240U 169To connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer ConnectionConnecting a monitor Connecting Video source devicesTo connect the projector to a monitor To connect the projector to a Component Video source device Connecting an Hdmi deviceConnecting a Component Video source device To connect the projector to an Hdmi deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceTo connect the projector to a composite Video source device Connecting a composite Video source deviceStarting up the projector OperationUsing the menus Entering the password recall procedure Utilizing the password functionSetting a password If you forget the passwordDisabling the password function Switching input signalChanging Color Space Fine-tuning the image size and clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Magnifying and searching for detailsEW270U EX240U Selecting the aspect ratioEN-28 Optimizing the image Selecting a picture modePicture modes for different types of signals Setting the User 1/User 2 modeFine-tuning the image quality in user modes 3D Color Management Using Wall ScreenTo cancel the timer, perform the following steps Setting the presentation timerHow to use the Timer On key? Freezing the image Adjusting the soundHiding the image Locking control keysStandby Audio Out Direct power offPersonalizing the projector menu display Shutting down the projectorL R Watching 3D ContentXGA60 If you are in a non-DHCP environment Configuring the LAN Control SettingsSupervising and controlling by computer If you are in a Dhcp environmentPress / to reveal Error Status Description How to Use Network FunctionDhcp GlossaryBasic Menu operationMenu system Main menu Sub-menu OptionsAdvanced System Setup Blank TimerDescription of each menu Tint Setting Brightness Contrast ColorColor Temperature Save SettingsBlank Timer System Setup Basic menu System Setup Advanced menuPresentation Timer Auto Power OffCurrent System Status Closed Caption EnableCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp mode as LowSetting Auto Power Off Lamp informationStatus Message Timing of replacing the lampSpare lamp for EX240U/EW270U VLT-EX240LP Replacing the lampResetting the lamp timer EN-52 Power Temp Lamp Power events IndicatorsTroubleshooting Projector specifications SpecificationsTiming chart DimensionsSupported timing for Hdmi Hdcp input Supported timing for Component-YPbPrinput Mitsubishi Electric Corporation
Top Page Image Contents