PLUS Vision U7-132/U7-137 Input the password using the number buttons 1 to, Changing the password

Page 35

General Operation

If the password input display appears when the power is turned on

When a password has been registered, the “Password” input window appears on the projected image when the power is turned on.The projector continues projecting this image until the correct password is input. At this time, only the STANDBY button (power off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see E-34.

Input the password using the number buttons (1 to 4).

Be sure to input the registered 4-digit number.

Example: To input the password “2441”

Press number button “2”. An “*” (asterisk) appears at the first place.

	Next press number buttons “4”, “4” and “1” in that order. Asterisks appear in all
	four places.	[Password input window]
	If the password matches, the window turns off and the projector can be used	[Password input window]

	normally.

Canceling the password/Changing the password

The password is canceled and changed using the menus. For instructions on operating the menus, see “Menu Operation Method” on E-37.

Canceling the password

Select “Security Lock” in the “Option” menu and set it to “Disable”.

This clears the password and disables the security lock.

The password input display no longer appears when the power is turned on.

Changing the password

After setting “Security Lock” to “Disable” as described above, set it back to “En- able”. The menu closes and the password registration display appears. Register the new password. See “Registering the password” on E-34.

Protecting the network settings by password

The network settings can be protected by password. Refer to the “Image Viewer / Network” manual.

E-35

Image 35

Contents U7-132/U7-137 DOC Compliance Notice PrecautionsLamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Miscellaneous Adjustments and SettingsTable of Contents Menu OperationsVideo cable RCA pin plug, 2 m / 6.6 feet Checking the Supplied AccessoriesRGB signal cable Mini D-sub 15-pin, 2 m / 6.6 feet DVI/Mini D-Sub 15-pin conversion adapter 18 cm / 0.59 feetCable pocket Checking the Supplied AccessoriesStorage case for projector and accessories USB cable type A, 2 m / 6.6 feetBuilt-in Security Slot Names of the Main Unit PartsNames of the Main Unit Parts Precautions Handling of the Remote Control Names of the Remote Control PartsInserting the Batteries Preparing the Remote ControlRemote Control Range Procedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuideDVI-D cable Available as an option. Order code Personal Computers with a DVI ConnectorConnections with Personal Computer RGB signal cable Supplied item Personal Computers with a Mini D-Sub 15-Pin ConnectorConnecting Personal Computers and Video Equipment Manufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo cable Suppled item Video cable Supplied item Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsConnections with Component Signals Supplied item Connections with Audio ConnectorsAudio cable Supplied item Audio conversion adapterConnections with the RGB OUT Connector Button on main unit Switch on the projector powerOperating Cursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageFinishing Unplug the power cableZoom ring Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenLowering the projection image Making Adjustments with the AdjustersFocus ring Raising the projection imageInput Selection Automatic Adjustment of Analog RGBGeneral Operation Freezing a Moving Picture Cancelling Video and Audio TemporarilyAdjustment of the Volume Press the Cancel button to immediately close the displayPress the Zoom button to enlarge the image Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Using the Presentation Timer Operation Using the Laser Pointer Click button Connecting the computer and projector Click button on back JOG buttonsCN-2 D-Sub 9-pin side Connecting via a LAN U7-137 onlyControlling the Projector from a Computer RS-232C connectionsProtecting the Projector with the Security Lock Changing the password Input the password using the number buttons 1 toCanceling the password/Changing the password Canceling the passwordVolume Using the Quick MenuContent of Adjustments and Settings Press the Select or button to adjustNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Operation Method Adjustment Bar and Settings ContentsAdjustment Bar Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation RGB Terminal Menu name Item Name Sub Menu SetupPicture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentImage Brightness / Contrast / Color / Tint / SharpnessImage ResetFine Picture PositionGamma Select the preset color modeColor Quick Color AdjColor Space Selection contents at the time of YPbPr inputColor Temp WhiteWhite Balance Aspect Personal Computer SignalVideo Signals ViewView Vertical Flip / Horizontal FlipKeystone Keystone SaveMenu Position SetupAuto Power Off Auto SourceInput Format Lamp ModeSetup Status IndicatorTo start the timer Presentation TimerBackground OptionLanguage On ScreenOption Network PasswordStartup Screen Security LockStatus Factory DefaultLamp Timer Reset InfoInfo Resolution / FrequencyLamp Timer Thermal Protector When an Indicator is Lit or BlinkingIndicator status What you should do Check the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Mechanical SpecificationsOptical ElectricalDigital Analog SignalResolution Frequency Video Table of Supported FrequenciesCabinet Dimensions 2005