PLUS Vision U7-132/U7-137 user manual Mount the new lamp cartridge, Mount the lamp cover

Page 63

Replacing the Lamp Cartridge

5 Mount the new lamp cartridge.

(1)Place the lamp cartridge with its socket facing to the left and push it in slowly.

(Line it up with the screw holes in the projector.)

(2)Turn the two lamp cartridge screws clockwise to tighten them.

6 Mount the lamp cover.

(1)Set the tip of the lamp cover in place, then close the lamp cover.

(2) Turn the lamp cover’s screw clockwise to tighten it.

7 Reset the Lamp Timer.

Connect the power cable, switch on the power, and then reset.

Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-56.

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.

Contact a store that sells the U7-132/U7-137 for a replacement lamp. Indicate you need a U7-300 replacement lamp for the U7-132/U7-137 (order code 28-057).

E-63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents U7-132/U7-137 DOC Compliance Notice PrecautionsLamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Miscellaneous Adjustments and SettingsTable of Contents Menu OperationsVideo cable RCA pin plug, 2 m / 6.6 feet Checking the Supplied AccessoriesRGB signal cable Mini D-sub 15-pin, 2 m / 6.6 feet DVI/Mini D-Sub 15-pin conversion adapter 18 cm / 0.59 feetCable pocket Checking the Supplied AccessoriesStorage case for projector and accessories USB cable type A, 2 m / 6.6 feetBuilt-in Security Slot Names of the Main Unit PartsNames of the Main Unit Parts Precautions Handling of the Remote Control Names of the Remote Control PartsPreparing the Remote Control Remote Control RangeInserting the Batteries Procedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuidePersonal Computers with a DVI Connector Connections with Personal ComputerDVI-D cable Available as an option. Order code Personal Computers with a Mini D-Sub 15-Pin Connector Connecting Personal Computers and Video EquipmentRGB signal cable Supplied item Manufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo cable Suppled item Video cable Supplied item Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsConnections with Component Signals Supplied item Connections with Audio ConnectorsAudio cable Supplied item Audio conversion adapterConnections with the RGB OUT Connector Switch on the projector power OperatingButton on main unit Cursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageFinishing Unplug the power cableZoom ring Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenLowering the projection image Making Adjustments with the AdjustersFocus ring Raising the projection imageAutomatic Adjustment of Analog RGB General OperationInput Selection Freezing a Moving Picture Cancelling Video and Audio TemporarilyAdjustment of the Volume Press the Cancel button to immediately close the displayEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Operation Using the Laser PointerClick button Connecting the computer and projectorClick button on back JOG buttonsCN-2 D-Sub 9-pin side Connecting via a LAN U7-137 onlyControlling the Projector from a Computer RS-232C connectionsProtecting the Projector with the Security Lock Changing the password Input the password using the number buttons 1 toCanceling the password/Changing the password Canceling the passwordVolume Using the Quick MenuContent of Adjustments and Settings Press the Select or button to adjustNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Operation Method Adjustment Bar and Settings ContentsAdjustment Bar Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation RGB Terminal Menu name Item Name Sub Menu SetupPicture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentImage Brightness / Contrast / Color / Tint / SharpnessImage ResetFine Picture PositionGamma Select the preset color modeColor Quick Color AdjColor Space Selection contents at the time of YPbPr inputColor Temp WhiteWhite Balance Aspect Personal Computer SignalVideo Signals ViewView Vertical Flip / Horizontal FlipKeystone Keystone SaveMenu Position SetupAuto Power Off Auto SourceInput Format Lamp ModeSetup Status IndicatorTo start the timer Presentation TimerBackground OptionLanguage On ScreenOption Network PasswordStartup Screen Security LockStatus Factory DefaultLamp Timer Reset InfoResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Blinking Indicator status What you should doThermal Protector Check the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Mechanical SpecificationsOptical ElectricalDigital Analog SignalResolution Frequency Video Table of Supported FrequenciesCabinet Dimensions 2005

U7-132/U7-137 specifications

The PLUS Vision U7-132/U7-137 represents a significant advancement in the realm of large-format display technology, catering to the demanding needs of contemporary professional environments. These models are designed to enhance collaborative efforts, facilitate presentations, and streamline information sharing, making them ideal for corporate offices, educational institutions, and creative studios.

One of the standout features of the PLUS Vision U7-132/U7-137 is their impressive display quality. Both models come equipped with high-resolution screens that deliver vivid colors, sharp images, and wide viewing angles, ensuring that presentations are visually engaging from any position in the room. The U7-132 sports a 132-inch diagonal screen, while the U7-137 offers a slightly larger 137-inch option, providing flexibility for various room sizes and presentation needs.

These models incorporate advanced touchscreen technology, allowing multiple users to interact with the display simultaneously. This feature promotes collaboration, as team members can annotate, highlight, and manipulate content in real time. This interactivity is further enhanced by the inclusion of palm rejection and precision touch capabilities, which allow for a natural writing experience similar to that of traditional whiteboards.

In terms of connectivity, the PLUS Vision U7-132/U7-137 supports a wide range of input options, including HDMI, USB-C, and wireless connectivity. This versatility enables seamless integration with various devices, from laptops to tablets and smartphones, ensuring that users can easily share their screens without the hassle of cables.

The built-in collaboration software provides users with tools for remote and in-person teamwork. Features like screen mirroring and digital whiteboarding enhance group productivity and creativity, allowing users to brainstorm and share ideas effortlessly. Additionally, the embedded audio system ensures that sound is clear and powerful, making it ideal for video presentations and virtual meetings.

Durability is another hallmark of the PLUS Vision U7-132/U7-137. Designed for heavy usage, these models incorporate rugged materials and scratch-resistant screens, ensuring that they can withstand the rigors of an active workspace.

Overall, the PLUS Vision U7-132/U7-137 combines state-of-the-art technology, high-quality display, and user-centric features, making them a powerful tool for enhancing communication and collaboration in any professional setting. With their blend of durability, connectivity, and interactive capabilities, they are poised to redefine the standards for large-format displays in the modern workplace.
Top Page Image Contents