PLUS Vision U4-136, U4-111 Finishing, Unplug the power cable, Standby indicator changes to flash

Page 27

Power Cable Connections and Switching the Power On/Off

Finishing

1 Switch off the power of the connected equipment

2 Switch off the power of the projector

Main unit operation: Press the STANDBY button.

Remote control operation: Press the STANDBY OFF button.

ON STANDBY OFF

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen will go off (in about 5 seconds) and the projector will enter the power-off op- eration.

Note

*The operation can be cancelled by pressing a button other than the STANDBY button.

*One more press of the STANDBY (STANDBY OFF) button will switch off the power.

The STANDBY indicator changes to flash-

 

Lit green

ing amber and lights a steady amber after

 

 

about 60 seconds (when the unit enters the

STATUS

STANDBY

standby mode).

 

 

Power Off

OK ?

Power Off

OK ?

 

Flashing amber

 

Lit amber

(Approximately 60 seconds)

Standby mode

STATUS

STANDBY

STATUS

STANDBY

3 Unplug the power cable

Check that the STANDBY indicator is lit in amber and then unplug the power cable.

The STANDBY indicator will go off when the power cable is unplugged.

Warrning

Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp or damage the projector.

E-26

Image 27
Contents U4-136/U4-131 U4-112/U4-111 DOC Compliance Notice Declaration of ConformityU4-112 PrecautionsU4-136 U4-131Lamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Table of Contents Video cable Mini DIN 4-pin plug, 2 m / 6.6 feet Checking the Supplied AccessoriesRemote control includes one button battery Power cable 1.8 m / 5.9 feetPC Card Adapter CompactFlash Card Checking the Supplied AccessoriesCarrying case for projector and accessories Pocket Velcro strap Cable storage pouchOpening the lens shutter Focus ring E-28 Lens shutter Remote control sensor E-12Front adjusters E-28 Names of the Main Unit PartsNames of the Main Unit Parts Built-in Security SlotNames of the Remote Control Parts VOL button E-33 Volume adjustment displayInfrared transmitter E-12 Using the remote control for the first time Preparing the Remote ControlButton Battery Replacement Remote Control RangeProcedure Up to Projecting to the Screen U4-136 Screen Size and Projection Distance Placement Guide100 U4-131 Screen Size and Projection Distance Placement GuideU4-111 Screen Size and Projection Distance Personal Computers with a DVI Connector Connections with Personal ComputerDVI-D cable Available as an option. Order code DVI/mini D-Sub 15-pin conversion cable Supplied item Personal Computers with a Mini D-Sub 15-Pin ConnectorConnecting Personal Computers and Video Equipment Personal computerManufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo cable Suppled item Video cable Supplied item Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsGreen Blue Red Connections with Component SignalsGreen Blue Red Cb Cr Pb PrSupplied item Connections with the Audio JackAudio cable Supplied item Audio conversion cableFirmly plug in all the way To wall outlet Switch on the projector powerOperating Lit amberCursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageFinishing Unplug the power cableStandby indicator changes to flash Standby modeZoom ring Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenLowering the projection image Making Adjustments with the AdjustersFocus ring Raising the projection imageGeneral Operation Automatic AdjustmentWhen Auto Source is On When Auto Source is OffVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Cancelling Video and Audio Temporarily Lamp ModeFreezing a Moving Picture Using the Presentation Timer Keystone Adjustment of the VolumeAdjust the volume To close the display immediately, press the Cancel buttonEnlarge to the desired size Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Press the Zoom buttonVolume Using the Quick MenuContent of Adjustments and Settings Example Brightness adjustment displayMain unit buttons Menu Operation MethodMenu Operation Method Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsMaking Adjustments/Settings This condition alLows selection Item name Ton and close the sub menu Selecting Another Menu Name with Remote Control OperationWhen a sub menu is displayed, press the Cancel but Press the Cancel button again and cancel the cursor DisplayView Menu name Item Name Sub MenuImage ColorInfo Menu name Item Name Sub Menu SetupPicture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentPicture Brightness / Contrast / Color / Tint / SharpnessPosition ResetPress of the Enter button forces the reset Fine PictureWhite ColorGamma Color TempWhite Balance Selection contents at the time of YCbCr inputSelection contents at the time of YPbPr input Color SpaceFilter Video SignalsView AspectView Power cable has been unpluggedVertical Flip Keystone SaveMenu Position SetupAuto Power Off Auto SourceSetup Input FormatVideo and SVideo Presentation Timer Logo BackgroundLogo Scaling Capture Mode Logo PositionInvalidata Logo Preview Start Logo CaptureThumbnail Initial SettingPlay Mode Switches the slide manuallyProgress Bar During Thumbnail Display IntervalRepeat Progress BarBackground Example of a display when Aspect button is pressedLanguage On ScreenDisplays the logo Startup ScreenStatus Factory DefaultLamp Timer Reset InfoResolution / Frequency Lamp TimerInfo Logo Capture Settings Startup Logo CreationPreparation and Projection of the Image Start Capture → Page E-53 Startup Logo CreationUsing the PC Card Viewer Before Using the PC Card ViewerTerminology Used in the Viewer Using the PC Card Viewer Slide Creation Method Slide Creation Guide Names and Functions of the Viewer Functions PC-CARD buttonSource button  Using the Tool Bar  Names and Functions of the Viewer Screen PartsSlide  Removal from the PC Card Slot Using CompactFlash CardsInsertion to the PC Card Slot of the Personal Computer  Insertion to the PC Card SlotSet to PC-CARD Switch the Input to the PC CardWhen PC Card Error is displayed PC Card Viewer OperationNext To return the cursor, use the Select button When a folder has been selected and opened,When the Select button has been pressed Selection MethodRotation of the Slides Thumbnail Display and Settings ChangesWhen the File Open Error is Displayed View the SlidesThermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Mechanical SpecificationsOptical ElectricalSignal Resolution Frequency Video Digital AnalogTable of Supported Frequency Cabinet Dimensions 190239 532.1 Unit mm inch 190 2003

U4-112, U4-111, U4-136 specifications

PLUS Vision has consistently pushed the boundaries of visual presentation technology, and their U4 series is a testament to their commitment to innovation and quality. Among the standout models in this series are the U4-111, U4-136, and U4-112. Each of these models brings a unique set of features and capabilities that cater to the evolving demands of modern visual communication.

The PLUS Vision U4-111 is designed for versatility and efficiency. Equipped with a high-resolution display, it ensures sharp and clear visuals, making it ideal for both educational and corporate environments. The U4-111 boasts an intuitive interface, allowing users to easily navigate through various functions, such as screen sharing and collaboration tools. Its lightweight and portable design mean it can be seamlessly transported between locations while maintaining durability.

Meanwhile, the U4-136 takes interactivity to the next level. This model is enhanced with advanced touch technology, allowing multiple users to engage simultaneously. This feature is particularly beneficial in collaborative settings, where brainstorming and group discussions are key. The U4-136 also includes connectivity options that support various devices, making it a strong choice for any tech-savvy environment. With its vibrant color reproduction and adjustable display settings, it enhances the overall viewing experience.

The U4-112, on the other hand, focuses on integration and smart features. This model supports wireless connectivity, enabling users to connect effortlessly to laptops, tablets, and smartphones. The U4-112 also includes built-in software for annotation and document sharing, streamlining presentations and meetings. Its sleek design makes it aesthetically pleasing while ensuring functionality remains at the forefront.

All three models in the PLUS Vision U4 series share common characteristics that highlight their quality and reliability. They feature robust construction, ensuring longevity even in high-use environments. The U4 series also prioritizes energy efficiency, reducing power consumption without compromising performance.

In conclusion, the PLUS Vision U4-111, U4-136, and U4-112 exemplify the brand's commitment to delivering high-quality visual solutions. With their diverse features and innovative technologies, these models cater to various user needs, making them ideal choices for educational institutions, corporate environments, and collaborative spaces. Each model brings forth unique capabilities designed to enhance learning and communication in today's fast-paced world.