PLUS Vision U4-111, U4-136, U4-112 Startup Logo Creation, Preparation and Projection of the Image

Page 61

Startup Logo Creation

The startup logo is a function that displays a created logo.

After turning on the power, a logo appears in about 15 seconds. The displayed logo disappears in about 30 seconds. A logo can be displayed by creating it on a personal computer, then projecting it with this projector and capturing it. See Pages E-51 to E-53 for information about the selection of “Logo Capture” and an explanation of the items.

Preparation and Projection of the Image

1. Using personal computer software, create an image that you would like to use on the startup screen, then save that file.

2. Connect the personal computer and the projector, then project the personal computer screen. The saved image will open.

Logo Capture Settings

1.Open “Logo Capture” on the menu

Select “Setup” → “Logo Capture” on the menu and press the ENTER button.

The logo capture sub menu will open.

2. Set the Logo Background Color → Page E-51

Select “Logo Background” and determine the background color. When the background of the created image is white, selection of “White” permits creation of a seamless startup screen.

3.Set the Logo Scaling → Page E-51 Select “Logo Scaling” and set the size.

When a large magnification has been selected, the image will blur somewhat.

4.Set the Logo Position → Page E-52

Select “Logo Position” and determine the display position of the logo.

5.Set the Compression Ratio → Page E-52

Select “Capture Mode” and select image quality priority or capture range priority.

6.Determine the Capture Range of the Image → Page E-53

Select “Start Logo Capture” and press the ENTER button.

There is a change to the capture range selection display.

(1) Use the SELECT ￿￿￿￿ buttons on the remote control to align the red frame with the upper left (starting point) of the image.

 

 

Move Capture Region

....................................

 

 

 

Adjust Capture Region Height

 

 

 

Toggle Width/Height Adjustment

“MENU”

 

 

 

Start

“ENTER”

Exit

“CANCEL”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2) Press the “+”/“–” buttons and determine the capture size. The lower right (end point) will move.To switch between height and width, press the MENU button.

To cancel, press the CANCEL button. There is a return to the menu dis- play.

 

 

Move Capture Region

....................................

 

 

 

Adjust Capture Region Height

 

 

 

Toggle Width/Height Adjustment

“MENU”

 

 

 

Start

“ENTER”

Exit

“CANCEL”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E-60

Page 60 Page 62
Image 61
Page 60 Page 62
Contents U4-136/U4-131 U4-112/U4-111 DOC Compliance Notice Declaration of ConformityU4-136 PrecautionsU4-131 U4-112Power Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Remote control includes one button battery Checking the Supplied AccessoriesPower cable 1.8 m / 5.9 feet Video cable Mini DIN 4-pin plug, 2 m / 6.6 feetCarrying case for projector and accessories Checking the Supplied AccessoriesPocket Velcro strap Cable storage pouch PC Card Adapter CompactFlash CardFront adjusters E-28 Focus ring E-28 Lens shutter Remote control sensor E-12Names of the Main Unit Parts Opening the lens shutterNames of the Main Unit Parts Built-in Security SlotVOL button E-33 Volume adjustment display Names of the Remote Control PartsInfrared transmitter E-12 Button Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen U4-136 Screen Size and Projection Distance Placement Guide100 U4-131 Screen Size and Projection Distance Placement GuideU4-111 Screen Size and Projection Distance Connections with Personal Computer Personal Computers with a DVI ConnectorDVI-D cable Available as an option. Order code Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorPersonal computer DVI/mini D-Sub 15-pin conversion cable Supplied itemManufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors Video cable Suppled item Video cable Supplied itemGreen Blue Red Cb Cr Connections with Component SignalsPb Pr Green Blue RedAudio cable Supplied item Connections with the Audio JackAudio conversion cable Supplied itemOperating Switch on the projector powerLit amber Firmly plug in all the way To wall outletPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorStandby indicator changes to flash Unplug the power cableStandby mode FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringFocus ring Making Adjustments with the AdjustersRaising the projection image Lowering the projection imageWhen Auto Source is On Automatic AdjustmentWhen Auto Source is Off General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Using the Presentation Timer Adjust the volume Adjustment of the VolumeTo close the display immediately, press the Cancel button KeystoneImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button Enlarge to the desired sizeContent of Adjustments and Settings Using the Quick MenuExample Brightness adjustment display VolumeMain unit buttons Menu Operation MethodMenu Operation Method Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al Making Adjustments/SettingsLows selection Item name When a sub menu is displayed, press the Cancel but Selecting Another Menu Name with Remote Control OperationPress the Cancel button again and cancel the cursor Display Ton and close the sub menuImage Menu name Item Name Sub MenuColor ViewInfo Menu name Item Name Sub Menu SetupPicture Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionPress of the Enter button forces the reset ResetFine Picture PositionGamma ColorColor Temp WhiteSelection contents at the time of YPbPr input Selection contents at the time of YCbCr inputColor Space White BalanceView Video SignalsAspect FilterVertical Flip Power cable has been unpluggedKeystone Save ViewAuto Power Off SetupAuto Source Menu PositionInput Format SetupVideo and SVideo Logo Background Presentation TimerLogo Scaling Logo Position Capture ModeInvalidata Logo Preview Start Logo CapturePlay Mode Initial SettingSwitches the slide manually ThumbnailRepeat IntervalProgress Bar Progress Bar During Thumbnail DisplayLanguage Example of a display when Aspect button is pressedOn Screen BackgroundDisplays the logo Startup ScreenLamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyInfo Startup Logo Creation Logo Capture SettingsPreparation and Projection of the Image Start Capture → Page E-53 Startup Logo CreationBefore Using the PC Card Viewer Using the PC Card ViewerTerminology Used in the Viewer Slide Creation Method Using the PC Card Viewer Slide Creation Guide PC-CARD button Names and Functions of the Viewer FunctionsSource button  Names and Functions of the Viewer Screen Parts  Using the Tool BarSlide Insertion to the PC Card Slot of the Personal Computer Using CompactFlash Cards Insertion to the PC Card Slot  Removal from the PC Card SlotWhen PC Card Error is displayed Switch the Input to the PC CardPC Card Viewer Operation Set to PC-CARDWhen the Select button has been pressed When a folder has been selected and opened,Selection Method Next To return the cursor, use the Select buttonWhen the File Open Error is Displayed Thumbnail Display and Settings ChangesView the Slides Rotation of the SlidesThermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Optical SpecificationsElectrical MechanicalResolution Frequency Video Digital Analog SignalTable of Supported Frequency 190 Cabinet Dimensions239 532.1 Unit mm inch 190 2003

U4-112, U4-111, U4-136 specifications

PLUS Vision has consistently pushed the boundaries of visual presentation technology, and their U4 series is a testament to their commitment to innovation and quality. Among the standout models in this series are the U4-111, U4-136, and U4-112. Each of these models brings a unique set of features and capabilities that cater to the evolving demands of modern visual communication.

The PLUS Vision U4-111 is designed for versatility and efficiency. Equipped with a high-resolution display, it ensures sharp and clear visuals, making it ideal for both educational and corporate environments. The U4-111 boasts an intuitive interface, allowing users to easily navigate through various functions, such as screen sharing and collaboration tools. Its lightweight and portable design mean it can be seamlessly transported between locations while maintaining durability.

Meanwhile, the U4-136 takes interactivity to the next level. This model is enhanced with advanced touch technology, allowing multiple users to engage simultaneously. This feature is particularly beneficial in collaborative settings, where brainstorming and group discussions are key. The U4-136 also includes connectivity options that support various devices, making it a strong choice for any tech-savvy environment. With its vibrant color reproduction and adjustable display settings, it enhances the overall viewing experience.

The U4-112, on the other hand, focuses on integration and smart features. This model supports wireless connectivity, enabling users to connect effortlessly to laptops, tablets, and smartphones. The U4-112 also includes built-in software for annotation and document sharing, streamlining presentations and meetings. Its sleek design makes it aesthetically pleasing while ensuring functionality remains at the forefront.

All three models in the PLUS Vision U4 series share common characteristics that highlight their quality and reliability. They feature robust construction, ensuring longevity even in high-use environments. The U4 series also prioritizes energy efficiency, reducing power consumption without compromising performance.

In conclusion, the PLUS Vision U4-111, U4-136, and U4-112 exemplify the brand's commitment to delivering high-quality visual solutions. With their diverse features and innovative technologies, these models cater to various user needs, making them ideal choices for educational institutions, corporate environments, and collaborative spaces. Each model brings forth unique capabilities designed to enhance learning and communication in today's fast-paced world.
Top Page Image Contents