PLUS Vision U4-111 Mount the new lamp cartridge, Mount the lamp cover, Reset the Lamp Timer

Page 76

Replacing the Lamp Cartridge

5 Mount the new lamp cartridge.

(1)Place the lamp cartridge with its socket facing to the right and push it in slowly.

(Line it up with the screw holes in the projector.)

(2)Turn the two lamp cartridge screws clockwise to tighten them.

6 Mount the lamp cover.

(1)Set the tip of the lamp cover in place, then close the lamp cover.

(2) Turn the lamp cover’s screw clockwise to tighten it.

7 Reset the Lamp Timer.

Connect the power cable, switch on the power, and then reset.

Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-58.

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.

Contact a store that sells the U4-136/U4-131/U4-112/U4-111 for a replacement lamp. Indicate you need a U4-150 replacement lamp for the U4-136/U4-131/U4-112/U4-111 (order code 28-061).

E-75

Page 75 Page 77
Image 76
Page 75 Page 77
Contents U4-136/U4-131 U4-112/U4-111 Declaration of Conformity DOC Compliance NoticePrecautions U4-136U4-131 U4-112Installation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Remote control includes one button batteryPower cable 1.8 m / 5.9 feet Video cable Mini DIN 4-pin plug, 2 m / 6.6 feetChecking the Supplied Accessories Carrying case for projector and accessoriesPocket Velcro strap Cable storage pouch PC Card Adapter CompactFlash CardFocus ring E-28 Lens shutter Remote control sensor E-12 Front adjusters E-28Names of the Main Unit Parts Opening the lens shutterBuilt-in Security Slot Names of the Main Unit PartsVOL button E-33 Volume adjustment display Names of the Remote Control PartsInfrared transmitter E-12 Preparing the Remote Control Button Battery ReplacementRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide U4-136 Screen Size and Projection Distance100 Placement Guide U4-131 Screen Size and Projection DistanceU4-111 Screen Size and Projection Distance Connections with Personal Computer Personal Computers with a DVI ConnectorDVI-D cable Available as an option. Order code Personal Computers with a Mini D-Sub 15-Pin Connector Connecting Personal Computers and Video EquipmentPersonal computer DVI/mini D-Sub 15-pin conversion cable Supplied itemTo Output the External Output Signal of a Notebook Computer Manufacturer Model KeyConnections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Suppled item Video cable Supplied itemConnections with Component Signals Green Blue Red Cb CrPb Pr Green Blue RedConnections with the Audio Jack Audio cable Supplied itemAudio conversion cable Supplied itemSwitch on the projector power OperatingLit amber Firmly plug in all the way To wall outletPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable Standby indicator changes to flashStandby mode FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringMaking Adjustments with the Adjusters Focus ringRaising the projection image Lowering the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Using the Presentation Timer Adjustment of the Volume Adjust the volumeTo close the display immediately, press the Cancel button KeystoneEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button Enlarge to the desired sizeUsing the Quick Menu Content of Adjustments and SettingsExample Brightness adjustment display VolumeMenu Operation Method Main unit buttonsMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuThis condition al Making Adjustments/SettingsLows selection Item name Selecting Another Menu Name with Remote Control Operation When a sub menu is displayed, press the Cancel butPress the Cancel button again and cancel the cursor Display Ton and close the sub menuMenu name Item Name Sub Menu ImageColor ViewMenu name Item Name Sub Menu Setup InfoPicture Adj. Picture Adjustment PictureBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Press of the Enter button forces the resetFine Picture PositionColor GammaColor Temp WhiteSelection contents at the time of YCbCr input Selection contents at the time of YPbPr inputColor Space White BalanceVideo Signals ViewAspect FilterPower cable has been unplugged Vertical FlipKeystone Save ViewSetup Auto Power OffAuto Source Menu PositionInput Format SetupVideo and SVideo Logo Background Presentation TimerLogo Scaling Logo Position Capture ModeInvalidata Logo Start Logo Capture PreviewInitial Setting Play ModeSwitches the slide manually ThumbnailInterval RepeatProgress Bar Progress Bar During Thumbnail DisplayExample of a display when Aspect button is pressed LanguageOn Screen BackgroundStartup Screen Displays the logoFactory Default Lamp Timer ResetInfo StatusLamp Timer Resolution / FrequencyInfo Startup Logo Creation Logo Capture SettingsPreparation and Projection of the Image Startup Logo Creation Start Capture → Page E-53Before Using the PC Card Viewer Using the PC Card ViewerTerminology Used in the Viewer Slide Creation Method Using the PC Card Viewer Slide Creation Guide PC-CARD button Names and Functions of the Viewer FunctionsSource button  Names and Functions of the Viewer Screen Parts  Using the Tool BarSlide Using CompactFlash Cards Insertion to the PC Card Slot of the Personal Computer Insertion to the PC Card Slot  Removal from the PC Card SlotSwitch the Input to the PC Card When PC Card Error is displayedPC Card Viewer Operation Set to PC-CARDWhen a folder has been selected and opened, When the Select button has been pressedSelection Method Next To return the cursor, use the Select buttonThumbnail Display and Settings Changes When the File Open Error is DisplayedView the Slides Rotation of the SlidesWhen an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Specifications OpticalElectrical MechanicalResolution Frequency Video Digital Analog SignalTable of Supported Frequency 190 Cabinet Dimensions239 532.1 Unit mm inch 190 2003

U4-112, U4-111, U4-136 specifications

PLUS Vision has consistently pushed the boundaries of visual presentation technology, and their U4 series is a testament to their commitment to innovation and quality. Among the standout models in this series are the U4-111, U4-136, and U4-112. Each of these models brings a unique set of features and capabilities that cater to the evolving demands of modern visual communication.

The PLUS Vision U4-111 is designed for versatility and efficiency. Equipped with a high-resolution display, it ensures sharp and clear visuals, making it ideal for both educational and corporate environments. The U4-111 boasts an intuitive interface, allowing users to easily navigate through various functions, such as screen sharing and collaboration tools. Its lightweight and portable design mean it can be seamlessly transported between locations while maintaining durability.

Meanwhile, the U4-136 takes interactivity to the next level. This model is enhanced with advanced touch technology, allowing multiple users to engage simultaneously. This feature is particularly beneficial in collaborative settings, where brainstorming and group discussions are key. The U4-136 also includes connectivity options that support various devices, making it a strong choice for any tech-savvy environment. With its vibrant color reproduction and adjustable display settings, it enhances the overall viewing experience.

The U4-112, on the other hand, focuses on integration and smart features. This model supports wireless connectivity, enabling users to connect effortlessly to laptops, tablets, and smartphones. The U4-112 also includes built-in software for annotation and document sharing, streamlining presentations and meetings. Its sleek design makes it aesthetically pleasing while ensuring functionality remains at the forefront.

All three models in the PLUS Vision U4 series share common characteristics that highlight their quality and reliability. They feature robust construction, ensuring longevity even in high-use environments. The U4 series also prioritizes energy efficiency, reducing power consumption without compromising performance.

In conclusion, the PLUS Vision U4-111, U4-136, and U4-112 exemplify the brand's commitment to delivering high-quality visual solutions. With their diverse features and innovative technologies, these models cater to various user needs, making them ideal choices for educational institutions, corporate environments, and collaborative spaces. Each model brings forth unique capabilities designed to enhance learning and communication in today's fast-paced world.
Top Page Image Contents