Microtek MiniLink manual Information, POINT-TO-POINT Host AP WEM

Page 13

WEB PAGES (cont’d)

B.INFORMATION

1.POINT-TO-POINT HOST AP WEM

The information page provides the details of how the Single-Point Host WEM is configured.

Access Point Name:	In most cases, the Access Point, or Host, is the receiving unit
Bridge Name:	The subscriber or client unit is the transmitting device
MAC Address:	Individual Ethernet device identification code
Firmware Version:	The latest firmware version is 6.4.0P (7.01)
Current Channel:	Refer to “Rotary Switch Position” for actual frequency channel
Turbo Mode:	0= default (off), 1 or 2= on, both units must be on channel 3,6 or 8 to turn turbo mode on
Rotary Switch Pos:	Indicates what channel the software has determined that has been enabled
25.5dBi Jumper:	“On” for: MLWES-30. Client “on” for: MLWES-D6 or MLWSU-DI
17.7dBi Jumper:	“On” for: MLWES-2-4. Client “on” for: MLWSUP
Security:	WPA AES 128 bit is standard default, WEP can also be enabled
IP address:	Shows the IP address of the connected WEM and can be changed as desired

- 10 -

Image 13

Contents Operations Manual Installation & USE Important Safety InstructionFCC Output Power Restrictions ML Wapom ML WAPML Wsuom ML WSUQuick Start Guide Ethernet Standard Wiring Note PRE-INSTALLATION RemindersMicrotek Electronics Return Policy Minilink Wireless Ethernet Module WEM Minilink Wireless Ethernet System WESWEM Description Front View Rear ViewSide View cont’d Power Injection Module PIMPIM Description TOP ViewWEM Installation & Operation WES Connection DiagramHostclient Client HostScrews and lock washers Configure CableMount OMNI-DIRECTIONAL WEM Establish Link Advanced OperationWEB Browser Interface WEB Pages LoginPOINT-TO-POINT Host AP WEM InformationMULTI-CONNECT Host AP WEM Information cont’dClient SU WEM POINT-TO-POINT and MULTI-CONNECT Host AP Wems STATIONS/APsSecurity WPA Configuration WirelessSecurity cont’d WEP ConfigurationAdministration Administration cont’d System Location System Installation NotesAddress Contact Phone Number WEM Specifications WEM Specifications cont’d Power Injection Module MicroTek Electronics, Inc Problem SuggestionLED FAQ Warranty Information