Microtek MiniLink manual WEM Specifications cont’d Power Injection Module

WEM SPECIFICATIONS (cont’d)

Power Injection Module

MECHANICAL

Physical	Plastic housing, not weatherproof
Dimensions	2.6” x 2.6” x 1.1”
Weight	2.5 oz
Interface	2 – RJ45 connectors
POWER
Power Requirements	12 VDC 500 mA (wall transformer supplied)
Power-over-Ethernet (PoE)	PoE “mid-span” compliant (pins 4,5 positive – pins 7,8
	ground)
Indicator	LED - red
Connectors	DC Jack 2.5 mm x 5.5 mm center positive, 2 – RJ45
ENVIRONMENTAL
Humidity	95% non-condensing
Operating Temperature	-20F to +150F

System Ranges

POINT-TO-POINT SYSTEMS_______

Up to 2600 & 3900 Feet	Integral directional patch antennas on both WEMs -
	5.3 GHz – 2600 ft, 5.8 GHz – 3900 ft
Up to 2 & 4 Miles	Integral directional 6 x 6 13-dBi patch antennas on both
	WEMs – 5.3GHz – 2 miles, 5.8 GHz – 4 miles
Up to 30 Miles	Integral directional patch antennas on both WEMs mounted
	in 25 dBi dish antennas - 5.8 GHz only
MULTI-CONNECT SYSTEMS
Up to 500 & 1000 Feet	Integral omni-directional patch antennas on both the Host
	AP WEM & Client SU WEM - 5.3 GHz - 500 ft, 5.8 GHz –
	1000 ft
Up to 1300 & 2600 Feet	Integral omni-directional patch antenna on the Host AP
	WEM & integral directional patch antenna(s) on the Client
	SU WEM(s) - 5.3 GHz 1300 ft, 5.8 GHz - 2600 ft
Up to 2600 & 3900 Feet	Integral directional patch antenna on the Host AP WEM &
	Client SU WEM(s) - 5.3 GHz – 2600 ft, 5.8 GHz – 3900 ft
Up to 1 & 2 Miles	Integral directional patch antenna on the Host AP WEM &
	integral directional 6 x 6 13-dBi patch antenna(s) on the
	Client SU WEM(s) - 5.3GHz – 1 mile, 5.8 GHz – 2 miles
Up to 6 Miles	Integral directional patch antenna on the Host AP WEM &
	Client SU WEM(s) – Client SU WEM(s) mounted in 25 dBi
	dish antenna(s) 5.8 GHz only

*For product improvement, design and specifications are subject to change without notice.

- 19 -