Step 1 
Setting Up the machine
5Install the Power Cord and Phone Line
Do not connect the Parallel or USB cable yet.
1Make sure that the power switch is off. Connect the AC power cord to the machine.
2Plug the AC power cord into an AC outlet. Turn the power switch on.
3Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack.
Warning
■The machine must be grounded using a
■Since the machine is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power cord connected to your machine when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your machine by disconnecting the telephone line first and then the power cord.
If you are sharing one phone line with an external telephone, connect it as shown below.
If you are sharing one phone line with an external telephone answering device, connect it as shown below.
TAD
TAD
Please set the receive mode to External TAD.
For more details, see “Connecting an external telephone answering device (TAD)” in Chapter 3 of the User’s Guide.
8