Microsoft SPC210SF setup guide Setting Up the machine, Install the Toner cartridges

Page 6

Step 1 Setting Up the machine

1Install the Toner cartridges

Do NOT connect the interface cable. Connecting the interface cable is done when installing the driver.

4Take out all the toner cartridges from the machine.

1Remove the protective tape.

2Open the front cover.

Front cover

3Remove the protective part.

5Carefully pull the protective part out of the machine.

6Rock the toner cartridge 3 to 4 times.

7Pull off the tape labeled REMOVE, and then remove the orange protective cover.

REMOVE tape

Protective cover

Go to the next page

4

Image 6

Contents Quick Setup Guide SP C210SF Improper Setup User’s Guide Getting Started Carton ComponentsControl Panel Table of Contents Setting Up the machine Install the Toner cartridgesRemove the protective parts of the Fusing Unit Install the OPC Belt Cartridge LoadTray Paper in the Paper Install the Power Cord and Phone Line Do not connect the Parallel or USB cable yetSetting the Date Setting your Station IDTime Selecting a Receive Mode Choose the Receive Mode which best suits your needsSetting the LCD Contrast Selecting Your LanguageInstalling the Drivers & Software Supplied CD-ROM Multi-Function SuiteFor Network Users Installing the Drivers & Software For Windows XP For Windows 98/98SE/Me/2000 Installing the Drivers & Software Software&Drivers For Windows XP For Windows 98/98SE/Me/2000 DriversSoftware For Windows NT Workstation Version 4.0 Users Drivers & Software Installing the Drivers & Software Finish and wait as the PC restarts Installing the BRAdmin Professional Configuration Utility For Network UsersTCP/IP Replacement Consumables Options and ConsumablesOptions Trademarks EN USA G157-3005