Onkyo SKW-540, SKF-540F, SKB-540, SKM-540S Listening to the Radio, Listening to AM/FM stations

Listening to the Radio

Listening to AM/FM stations

TUNER

TUNING

MASTER VOLUME

TUNING

PRESET

STANDBY/ON

STANDBY

ENTER

MULTI CH

DVD

VIDEO 1

VIDEO 2

VIDEO 3

TAPE

TUNER

C D

RETURN

SETUP

VCR

VIDEO 3 INPUT

PHONES

VIDEO

L AUDIO

R

SPEAKERS

TONE

STEREO

LISTENING MODE

DISPLAY

DIGITAL

DIMMER MEMORY

TUNING

A

B

INPUT

MODE

TUNING MODE

With the built-in tuner, you can enjoy AM and FM radio stations.

1 TUNER Use the [TUNER] input selector

button to select AM or FM.

In this example, FM has been selected.

Band Frequency

(Actual display depends on country.)

■ AM Frequency Step Setup (not North America)

You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1	Press the [SETUP] button, use the Up
	and Down [ ]/[	] buttons to select “0.
	Hardware Setup,” and then press
	[ENTER].
2	Use the Up and Down [ ]/[ ] buttons
	to select “AM Freq,” and then use the
	Left and Right [	]/[ ] buttons to
	select:

10 kHz: Select if 10 kHz steps are used in your area.

9 kHz: Select if 9 kHz steps are used in your area.

3	Press the [SETUP] button.
	Setup closes.

Tuning into AM/FM Radio Stations

■Auto Tuning Mode

1 TUNINGMODE	Press the [TUNING MODE] button
	so that the AUTO indicator

appears on the display.

2	Press the TUNING Up or Down
TUNING PRESET	[ ]/[ ] button.
	Searching stops when a station is
	found.

■ Manual Tuning Mode

1	TUNINGMODE	Press the [TUNING MODE] button
		so that the AUTO indicator disap-

pears from the display.

2		Press and hold the TUNING Up or
	TUNING PRESET	Down [ ]/[ ] button.
		The frequency stops changing when
		you release the button.
		Press the buttons repeatedly to change
		the frequency one step at a time.

The American model changes FM frequency in 0.2 MHz steps, 10 kHz steps for AM. For other models it’s

0.05MHz steps for FM and 9 kHz (or 10 kHz) steps for

AM.

When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears.

TUNED AUTO

FM STEREO

Tuning into Weak FM Stereo Stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

Note:

• You can also use the remote controller’s Up and Down []/[ ] buttons to tune the radio.

38