Video Attenuation, Video ATT0 default | Onkyo HT-S790, SKF-540F

Troubleshooting—Continued

The AV receiver contains a microcomputer for signal pro- cessing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least ﬁve seconds, and then plug it back in again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded cor- rectly.

Before disconnecting the power cord from the wall out- let, set the AV receiver to Standby.

Memory Backup

The AV receiver uses a battery-less memory backup system in order to retain radio presets and other set- tings when it’s unplugged or in the case of a power fail- ure. Although no batteries are required, the AV receiver must be plugged into an AC outlet in order to charge the backup system. Once it has been charged, the AV receiver will retain the settings for several weeks, although this depends on the environment and will be shorter in humid climates.

The following settings can be made for the S-Video and composite video inputs

You must use the buttons on the unit to make these set- tings.

1.While holding down the input selector button for the input source that you want to set, press the [SETUP] button.

2.	Use the Up and Down [	]/[	] buttons to select a
	setting (see below).
3.	Use the Left and Right [	]/[	] buttons to change
	the setting:
4.	Press the [SETUP] button when you’ve ﬁnished.

•Video Attenuation

This setting can be made for the DVD, VIDEO 1, VIDEO 2, or VIDEO 3 input.

If you have a games console connected to an S-Video or composite video input, and the picture isn’t very clear, you can attenuate the gain.

Video ATT:0: (default).

Video ATT:2: Gain is reduced by 2 dB.

•Outputting S-Video Sources from the Composite Video Outputs

This setting can be made for the DVD, VIDEO 1, or VIDEO 2 input.

With this setting, you can output S-Video input sources from the composite video outputs, useful if your TV doesn’t have any S-Video inputs.

Y/C Mix:Off: S-Video input signals are output by only S-Video outputs (default).

Y/C Mix:On: S-Video input signals are output by S-Video outputs and composite video outputs.

HT-S790, SKW-540, SKM-540S, SKB-540, SKF-540F specifications

Onkyo, a renowned name in the audio equipment industry, has consistently delivered high-quality speakers and home theater systems, and the SKF-540F, SKW-540, SKB-540, SKM-540S, and HT-S790 are no exceptions. These models showcase an impressive combination of performance, design, and innovative technology, appealing to both audiophiles and casual listeners alike.

The Onkyo SKF-540F speakers are floor-standing models that emphasize clarity and depth in sound. They feature a two-way design that includes a high-frequency tweeter and a robust woofer, providing a well-balanced audio experience. With a frequency response ranging from 30 Hz to 120 kHz, these speakers can deliver deep bass and clear highs, making them suitable for a variety of music genres and movie soundtracks.

Complementing the SKF-540F is the SKW-540 subwoofer. This powered subwoofer features a front-firing design and a large driver, allowing it to produce powerful low frequencies that enhance the overall audio experience. The adjustable low-pass filter and phase control further allow users to tailor the bass response to their room acoustics, ensuring optimal performance.

The Onkyo SKB-540 is an ideal addition for those who seek a compact yet powerful surround sound experience. These bookshelf speakers are versatile, capable of functioning as front, rear, or even satellite speakers. Despite their smaller size, they incorporate advanced technologies such as nonlinear distortion correction, ensuring a clean and clear sound profile that stands out even in larger setups.

For those seeking a surround sound solution, the SKM-540S offers wall-mountable satellite speakers designed to be part of a complete home theater system. These speakers provide an expansive soundstage and immersive audio experiences, making action-packed movies and music more enjoyable.

At the heart of the home theater setup is the Onkyo HT-S790, a comprehensive 5.1-channel receiver system. This system is equipped with advanced surround sound decoding technology, such as Dolby Atmos and DTS:X, allowing for an enveloping audio experience. Additionally, it supports a wide range of connectivity options, including HDMI inputs and wireless capabilities, making it easy to integrate with various media sources.

In summary, the Onkyo SKF-540F, SKW-540, SKB-540, SKM-540S, and HT-S790 together create a robust audio environment that showcases Onkyo's dedication to quality sound and innovative technology. Whether for music or films, these products provide an exceptional auditory experience that enhances any home entertainment setup.