Microsoft P4X4-ALH manual USB3, USB4, USB5, USB6 Connectors, Type

Page 18

	Hardware Installation
2.5.9. USB3, USB4, USB5, USB6 Connectors
Connector:	CN30 (USB 3)/CN31 (USB 4)/CN32 (USB5)/CN38 (USB6)
Type:	5 pin

You already have two USB2.0 ports available, USB1 and 2 (see external con- nectors). The internal USB connectors allow you to add on an optional kit to expand the total number of USB ports available. The mainboard has four inter- nal USB2.0 connectors (CN30/CN31/CN32/CN38). This enables you to use an extra four USB devices. Cable for these additional connectors needs to be pur- chased separately.

Note: The PIN assignment of the internal USB 2.0 connectors (CN30, CN31, CN32 and CN38) are follow the specifications of Intel standard.

Top View of USB Ports

Front View of USB Ports

USB3/5

USB4/6

USB3/5

USB4/6

5 Data +

1 VCC

2 VCC

6 Data +

7 Ground

3 Data -

4 Data -

8 Ground

3 Data-

4 Data-

5 Data+

6 Data+

7 Ground

8 Ground

10 NC

1 VCC

2 VCC

10 NC

2.5.10. Front Audio Connector

Connector:

CN39 (Front Audio)

Type:

10 pin

This connector is designed to be used with a Front-Utility Panel. The utility panel was developed so that a user is able to bring the speaker out, micro- phone in connectors to the front of their PC. This makes things like plugging in speakers and earphones much less troublesome.

Front Audio Connector

						Pin		Pin
	2	4	6	8	10	1	MIC-IN (Left)	2	Ground
	2	4	6	8	10
						3	MIC-IN (Right)	4	NC
	1	3	5	7	9	5	LINE-OUT R	6	NC
	1	3	5	7	9	7	NC	8	Key
						7	NC	8	Key
						9	LINE-OUT L	10	NC

Page 18

The P4X4-ALH Mainboard

Image 18

Contents P4X4-ALH User’s Notice Table Of Contents Table Of Contents Mainboard and PC 99 ATX External Connector Layout Overview Features and SpecificationsMainboard Dimensions P4X4-ALH MainboardOnboard LAN Features CPU Switching Voltage RegulatorOnboard Audio Features System MemoryUSB2.0 Ports ConnectorsATX Double Deck Ports PC 99 color-coded connectors PCI Bus Master IDE ControllerSystem Health Monitor Functions System IntelligenceInstallation Checklist Installation Steps Expansion Slots, Jumpers and Internal Connectors CPUInstallation of the CPU CPU, Memory and Expansion SlotsMemory Modules Pins PCI SlotsAGP Accelerated Graphics Port Slot Internal Connectors CPU Fan and Chassis Fan Connectors Connector CN13 FAN1/CN17 FAN2 Type PinATX Power Supply Connectors CD-IN/AUX-IN Connector ConnectorWOL Wake-On-LAN Connector USB3, USB4, USB5, USB6 Connectors ConnectorType Channel OUT Connector Connector CN46 4 CH OUT Type PinSL Sleep LED Connector System Panel Buttons and LED ConnectorsPW Power On/Off and External Suspend Switch Connector HL IDE HDD LED ConnectorSpeaker and Power LED Connectors External ConnectorsConnector CN18 Type Parallel Port Connector Connector CN5 LPTAudio/Game Connector RJ-45 LAN Port Connector Connector CN35 LAN2. JP3 USB1, USB2 Power Type 3 pin Jumper Settings1. JP1 Keyboard Power Type 3. JP5 CPU Clock Type 2 pin Default Short4. JP8 Check 1.5V AGP otional Type 2 pin Default Open 5. JP9 Clear Cmos Type 3 pinTo clear the CMOS, please follow these instructions Award Bios Cmos Setup Utility Main MenuTime hh mm ss Navigation KeysDate mm dd yy IDE Primary / Secondary Master / SlaveDrive a /B Phoenix AwardBIOS Cmos Setup Utility Standard Cmos FeaturesFloppy 3 Mode Support Diskette Drive Type of Disk Drive CapacityHalt On Advanced Bios FeaturesPhoenix AwardBIOS Cmos Setup Utility Advanced Bios Features Base Memory / Extended Memory / Total MemoryBoot Other Device Quick Power On Self TestFirst / Second / Third Boot Device Boot Up Floppy SeekTypematic Delay Boot Up NumLock StatusTypematic Rate Setting Video Bios ShadowAdvanced Chipset Features 4AGP Aperture Size 4SDRAM CAS LatencyAGP & P2P Bridge Control 4AGP Driving ControlCPU & PCI Bus Control System Bios CacheableDelay Prior to Thermal 4CPU to PCI Write BufferVIA OnChip IDE Device 4IDE Prefetch ModeIntegrated Peripherals 4OnChip IDE Channel 0/14Primary/Secondary, Master/Slave Udma 4Onboard LAN Boot ROM4Primary/Secondary, Master/Slave PIO VIA OnChip PCI Device4UR2 Duplex Mode 4UART Mode Select4IR Transmission Delay 4Use IR Pins4ECP Mode Use DMA 4Onboard Parallel Mode4EPP Mode Select 4Game Port AddressPower Management Setup Soft-Off by Pwrbtn Modem Use IRQVideo Off Method Pwron After PWR FailIRQ/Event Activity Detect 4Power On by PCI Card4RTC Alarm Resume 4PCI MasterPNP OS Installed PNP/PCI ConfigurationPhoenix AwardBIOS Cmos Setup Utility PnP/PCI Configurations Reset Configuration DataIRQ Resources PC Health StatusResources controlled By PCI/VGA Palette SnoopFrequency/Voltage Control Load Fail-Safe Defaults Load Fail-Safe Defaults / Load Optimized DefaultsPhoenix AwardBIOS Cmos Setup Utility Load Optimized DefaultsWhen Setup is selected in the Security Option Set Supervisor Password and User PasswordSet Supervisor Password When System is selected in Security OptionSave & Exit Setup/Exit Without Saving Save & Exit SetupExit Without Saving