Microsoft P4X4-ALH IRQ/Event Activity Detect, 4PCI Master, 4Power On by PCI Card, 4LAN Resume

Managing The PC BIOS

IRQ/Event Activity Detect

When you press the "Enter" the following menu will appear:

Phoenix - AwardBIOS CMOS Setup Utility

IRQ/Event Activity Detect

PS2KB Wakeup Select	[Hot Key]
PS2KB Wakeup from S3/S4/S5	[Disabled]
X Power Button Lock	[Enabled]
PS2MS Wakeup from S3/S4/S5	[Disabled]
VGA	[OFF]
LPT & COM	[LPT/COM]
HDD & FDD	[ON]
PCI Master	[OFF]
PowerOn by PCI Card	[Disabled]
LAN Resume	[Disabled]
RTC Alarm Resume	[Disabled]
X Date (of Month)	0
X Resume Time (hh:mm:ss)	0 : 0 : 0
4IRQs Activity Monitoring	[Press Enter]

Item Help

Menu Level 4

4VGA

When you enable this option, any VGA signal will wake up the system.

4LPT & COM

When this field is “ON” any activity from these devices, or their IRQ’s will wake up the system.

4HDD & FDD

When this field is “ON” any activity from the HDD or the FDD will wake up the system.

4PCI Master

When you enable the PCI Master mode, any activity from one of the listed system peripheral devices wakes up the system.

4Power On by PCI Card

The system can be woken up by the PME# on the PCI card.

4LAN Resume

An input signal from the LAN will wake up the system from a soft off state.

4RTC Alarm Resume

When enabled, you can use the following two fields to select the time and date to wake up the PC system from power saving mode.

4Date (of Month)/Resume Time (hh:mm:ss)

When RTC Alarm Resume is enabled, your can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode.

4IRQs Activity Monitoring

The following is a list of IRQ’s, Interrupt ReQuests, which can be exempted much as the COM ports and LPT ports above can. When an I/O

Page 40

The P4X4-ALH Mainboard