Copytoserver Destination | Microsoft 79G03550, T5D-01575, 79G-03550

a.set isCustomLocation =1.

b.set directory=<custom preload folder specified in CoConfig.xml>\OEMOffice15\.

Example: c:\preload\OEMOffice15\.

where c:\preload= <customer preload folder specified in CoConfig.xml>

∙If you modify the CoConfig.xml file, make sure to save it to the

[FOLDERID_ProgramData]\Microsoft\OEMOffice15 folder. If this file is not found in that folder, the program will not run.

∙Do not modify the root directory [FOLDERID_ProgramData]\Microsoft\OEMOffice15. Modifying the root directory might cause errors during uninstallation.

To perform a high-volume (customized) installation

1.Run the copytoserver.bat file to copy the contents of the OPK DVD to a network installation point:

copytoserver <Destination>

where <Destination> is the location where the installation files are to be copied. Make sure to specify the full UNC path. This parameter is required to successfully complete the command.

2.If you decide to preload multiple language versions of Office 2013, for each language, run the copytoserver.bat file to copy the contents of the appropriate OPK DVD to the same share on the network installation point:

copytoserver <Destination>

where <Destination> is the location where the installation files are to be copied. This parameter is required to successfully complete the command.

3.Run the oemsetup.ll-cc.bat file on computers to preload Office 2013 for each language that you want to preload:

oemsetup.ll-cc.bat[Referral=ReferralCode] [x64]

Note: ll is the two-letter abbreviation for the language and cc is the two-letter abbreviation for the country or culture.

Important: You must specify the [Referral=ReferralCode] parameter when running the oemsetup.ll-cc.bat file for the first language. It is not necessary to specify the parameter again for subsequent languages. If the parameter is specified again, it will be ignored.

Administrator permissions are required to run the oemsetup.ll-cc.bat file.

2013 OPK Guide