Onkyo SKB-550 Using the Listening Modes, Selecting Listening Modes, Selecting on the AV Receiver

Selecting Listening Modes

For a description of each listening mode, see “About the Listening Modes” on page 50.

•The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial or optical).

•Listening mode availability depends on the format of the current input signal.

•While a pair of headphones is connected, you can select only the Pure Audio (not North American model), Mono, Direct, or Stereo listening mode.

•The listening modes cannot be selected while speaker set A is off.

Selecting with the Remote Controller

SURROUND

LISTENING MODE

Selecting on the AV Receiver

PURE AUDIO

STEREO

LISTENING MODE

■[PURE AUDIO] button (not North American model)

This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver outputs no video signals and its display is turned off. Pressing this button again will select the previous lis- tening mode.

Video received by the HDMI IN 1 and 2 inputs is passed through to the HDMI OUT even if the Pure Audio listening mode is selected.

■[STEREO] button

This button selects the Stereo listening mode.

■LISTENING MODE []/[ ] buttons

Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the cur- rent input source.

■[STEREO] button

This button selects the Stereo listening mode.

■[SURROUND] button

This button selects the Dolby Digital and DTS listen- ing modes and the Neural Surround* listening mode (* North American model only).

■LISTENING MODE []/[ ] buttons

Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the cur- rent input source.