Onkyo SKB-550, SKM-550S, SKF-550F, SKW-550, SKC-550C, HT-R550 instruction manual Troubleshooting

Page 66

Troubleshooting—Continued

The center speaker produces no sound

•When the Stereo or Mono listening mode is selected, the center speaker produces no sound (page 50).

•Make sure the speakers are configured correctly (page 56).

The surround back speakers produce no sound

•While speaker set B is on, speaker set A is reduced to 5.1-channel playback and the surround back speakers produce no sound.

•The surround back speakers are not used with all lis- tening modes. Select another listening mode

(page 50).

•Not much sound may be produced by the surround back speakers with some sources.

•Make sure the speakers are configured correctly (page 56).

The subwoofer produces no sound

•The subwoofer outputs no sound while only speaker set B is on. Turn on speaker set A.

•When you play source material that contains no infor- mation in the LFE channel, the subwoofer produces no sound.

•Make sure the speakers are configured correctly (page 56).

Speaker set B produces no sound

•Speaker set B only outputs sources that are connected to an analog input. Make sure that the analog audio cables are connected properly.

There’s no sound with a certain signal format

•Check the digital audio output setting on the con- nected device. On some games consoles, such as those that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an audio output format from a menu.

Can’t get 6.1- or 7.1-channel playback

•While speaker set B is on, speaker set A is reduced to 5.1-channel playback.

The volume cannot be set to 79

•When the volume level of each speaker has been adjusted (pages 47, 59), the maximum possible vol- ume may be reduced.

Noise can be heard

•Using cable ties to bundle audio cables with power cords, speaker cables, and so on may degrade the audio performance, so don’t do it.

•An audio cable may be picking up interference. Try repositioning your cables.

The Late Night function doesn’t work

•Make sure the source material is Dolby Digital (page 52).

The multichannel DVD input doesn’t work

•Check the multichannel DVD input connections (page 28).

•To select the multichannel DVD input, press the [MULTI CH] input selector button.

•Check the audio output settings on your DVD player.

About DTS signals

•When playing DTS program material, using the pause, fast forward, or fast reverse function on your player may produce a short audible noise. This is not a mal- function.

•When DTS program material ends and the DTS bit- stream stops, the AV receiver remains in DTS listen- ing mode and the DTS indicator remains on. This is to prevent noise when you use the pause, fast forward, or fast reverse function on your player. If you switch your player from DTS to PCM, because the AV receiver does not switch formats immediately, you may not hear any sound, in which case you should stop your player for about 3 seconds, and then resume playback.

•With some CD players, you won’t be able to playback DTS material properly even though your player is con- nected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate, or frequency response changed) and the AV receiver doesn’t recog- nize it as a genuine DTS signal. In such cases, you may hear noise.

Video

There’s no picture

•Make sure that all video connecting plugs are pushed in all the way (page 24).

•Make sure that each video component is properly con- nected.

•The AV receiver does not convert between formats, so if a video source component is connected to a compo- nent video input, your TV must be connected to the component video output (page 25).

•If a video component is connected to an HDMI input, your TV must be connected to the HDMI OUT (page 29).

•On your TV, make sure that the video input to which the AV receiver is connected is selected.

•While the Pure Audio listening mode (not North American model) is selected, the video circuits are turned off and the AV receiver outputs no video sig- nals.

•Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported (page 29).

66

Page 65 Page 67
Image 66
Page 65 Page 67
Contents HT-SR800 Important Safety Instructions AvisPrecautions PowerFCC Information for User Using Close to a TV or Computer Speaker PrecautionsPlacement Input Signal WarningSpeaker Sets a and B Speaker set a Speaker set B Indicator OutputEnjoying Home Theater Center speakerPackage Contents Features Hdmi Video SetupAutomatic Speaker Setup Digital Input Input DisplayContents Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplaySirius antenna North American models only Digital in Optical 1, 2 and Coaxial 1Hdmi in 1, 2, and OUT XM antenna North American models onlyRemote Controller Installing the BatteriesAiming the Remote Controller Remote Controller Using the Remote ControllerRECEIVER/TAPE Mode Buttons used when the Tuner input is selected Listening Mode buttonsRemote Mode buttons Buttons used when the Tape input is selectedDVD Mode DISC/ALBUM +/- button CD/MD/CDR/DOCK ModeTo select the input source, press Arrow / and Enter buttonsSpeakers Subwoofer SKW-550Front left and right speakers SKF-550F Connecting Your SpeakersEnjoying Home Theater Surround back left and right speakers SKB-550Connecting Speaker Set a Connecting Your SpeakersSpeaker Connection Precautions Using the Speaker Terminal ToolWall Mounting SKF-550FConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor AM Antenna Connecting AntennasConnecting an Outdoor FM Antenna Using a TV/FM Antenna SplitterOptical Digital Jacks Connecting Your ComponentsAbout AV Connections AV Connection Color CodingWhich Connections Should I Use? Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Audio Connection FormatsConnecting a TV or Projector HintConnecting a DVD player Choose a video connection from a , B , and CDVD player Hooking Up the Multichannel DVD Input Connecting Components with Hdmi Assign the HdmiDVD player Step VCR Connecting a VCR or DVD Recorder for PlaybackVCR or DVD recorder DVD recorderChoose a video connection from a and B Connecting a VCR or DVD Recorder for RecordingConnecting a Camcorder, Games Console, or Other Device Make the video connection a Make the audio connection aVideo source Satellite, cable, set-top box, etcConnecting a CD Player or Turntable CD Player or Turntable MM with Built-in Phono Preamp StepRI Dock with video Connecting an RI DockConnecting a Cassette, CDR, MiniDisc, or DAT Recorder RI Dock without videoAuto Power On/Standby Connecting Onkyo ComponentsConnecting the Power Cord Remote ControlTurning On the AV Receiver Turning On and StandbySmooth Operation in a Few Easy Steps First Time Setup Automatic Speaker Setup Audyssey 2EQ/HTIBMeasurement Points First Time Setup Using Audyssey 2EQ/HTIBChanging the Speaker Settings Manually Error MessagesTo Retry the Automatic Speaker Setup Using a Powered SubwooferHdmi Video Setup Digital Audio Input Setup Changing the Input DisplayPlaying Your AV Components Select a suitable listening mode and enjoySee Using the Listening Modes on Basic AV Receiver OperationUsing the Multichannel DVD Input Playing Your AV ComponentsDisplaying Source Information Tuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Presetting AM/FM Stations Listening to the RadioCommon Functions Adjusting the Bass and TrebleSetting the Display Brightness Muting the AV ReceiverUsing Headphones Using the Sleep TimerAdjusting Speaker Levels Common FunctionsSelecting Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV ReceiverUsing the Listening Modes DVDAbout the Listening Modes DTSOnkyo Original DSP Modes Using the CinemaFILTER Using the Audio Adjust SettingsUsing the Late Night Function Dolby Digital only DTS Neo6 Music Mode Setting Input Channel SettingsPlii and PLIIx Music Mode Settings Dolby Digital EX Input Signal SettingLstn Angl Listening Angle Listening Angle SettingMultichannel Subwoofer Setting SW SensRecording Recording the Input SourceRecording Audio and Video from Separate Sources Advanced Setup Advanced Speaker SettingsSpeaker Configuration Advanced Setup Crossover FrequencyDouble Bass Speaker DistanceSpeaker Levels Equalizer Settings Setup menu closesButtons to select Equalizer, Digital Input Signal Formats Correcting Sound and Picture SyncEntering Remote Control Codes Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for Onkyo Components Connected viaResetting Remote Mode Buttons Controlling Other ComponentsCH + STANDBY/ON, TVTV VOL Operates the VCRTroubleshooting Troubleshooting Can’t control other components Remote controller doesn’t workSound changes when I connect my head- phones Can’t recordMemory Backup Video Section SpecificationsAmplifier Section Tuner Section1ch Home Theater Speaker Package Powered Subwoofer SKW-550 Center Speaker SKC-550CSpecifications Front Speaker SKF-550FMemo Onkyo Europe UK Office Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo China Limited

SKF-550F, HT-R550, SKC-550C, SKM-550S, SKW-550 specifications

Onkyo, a renowned name in the audio equipment industry, offers a range of high-performance home theater systems designed to elevate the audio experience. Among their impressive lineup are the SKB-550, SKW-550, SKM-550S, SKC-550C, and HT-R550, each catering to different aspects of home entertainment.

The SKB-550 is a robust and stylish bookshelf speaker system, delivering crystal clear sound with minimal distortion. Its compact design makes it suitable for various room sizes while retaining the power needed for a rich audio experience. Equipped with a 6.5-inch woofer and a 1-inch tweeter, it ensures an expansive frequency response, allowing users to enjoy both deep bass and crisp highs.

Complementing the SKB-550 is the SKW-550 subwoofer, which features a 10-inch cone driver powered by a built-in amplifier. This subwoofer is designed to produce deep, impactful bass that adds depth to any movie or music experience. It incorporates phase control and adjustable crossover frequency settings, allowing users to customize the sound to their liking. The front-firing design ensures flexibility in placement, making it easy to integrate into any home theater setup.

For those looking to enhance their surround sound experience, the SKM-550S satellite speakers deliver exceptional performance as part of a multi-channel audio system. With their compact design and 4-inch mid-bass driver, these speakers produce a balanced and immersive audio landscape. The SKM-550S is equipped with Onkyo's innovative Wide Range Technology for an expansive soundstage and realistic sound reproduction.

The SKC-550C center channel speaker is essential for crisp dialogue and clear audio in films. Featuring dual 5.25-inch woofers and a 1-inch tweeter, the SKC-550C ensures that dialogue is always audible, even at low volumes. Its sleek design fits seamlessly with other components in the Onkyo lineup.

At the heart of the system lies the HT-R550 AV receiver, which is packed with advanced features for a modern home theater. Supporting multiple audio formats such as Dolby Atmos and DTS:X, the HT-R550 provides an advanced surround sound experience. Additionally, this receiver boasts Bluetooth connectivity, enabling users to stream music effortlessly from their devices, and an intuitive setup process that simplifies installation.

Collectively, the combination of the Onkyo SKB-550, SKW-550, SKM-550S, SKC-550C, and HT-R550 creates a complete home theater environment, offering stunning sound performance, versatility, and ease of use. Whether for movie nights or music sessions, this audio ensemble provides an outstanding auditory experience that caters to audiophiles and casual listeners alike.
Top Page Image Contents