Onkyo HT-R550, SKB-550, SKM-550S, SKF-550F, SKW-550, SKC-550C instruction manual Speaker Levels

Page 59

Advanced Setup—Continued

7

Press the [SETUP] button.

 

 

Setup closes.

SETUP

Notes:

•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

•The speaker distance cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the multichannel DVD input is being used.

Speaker Levels

These settings are set automatically by the Automatic Speaker Setup function (see page 37).

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.

1

 

Press the [RECEIVER] REMOTE

RECEIVER

MODE button, followed by the

 

 

 

 

[SETUP] button.

 

SETUP

 

2

 

Use the Up and Down [ ]/[ ]

buttons to select “Level Cal,” and then press [ENTER].

A pink noise test tone is output by the front left speaker.

3

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

As each speaker outputs the test tone,

 

its name appears on the display.

 

 

 

 

 

 

 

 

 

 

 

 

4

Use the Left and Right [

]/[ ]

 

buttons to adjust the speaker

 

level, and use the Down [

] but-

 

ton to select the next speaker.

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

5

Repeat step 4 so that the level of

 

 

the test tone coming from each

 

speaker is the same.

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 56) do

 

not output the test tone.

 

 

6

Press the [SETUP] button.

 

 

Setup closes.

 

Don’t forget to turn down the volume if

SETUP

you turned it up while setting the levels.

 

 

Notes:

•A quick way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to turn on the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adjust the levels, and use the [CH SEL] button to select the speakers.

•The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted.

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents
HT-SR800 Avis Important Safety InstructionsFCC Information for User PrecautionsPower Input Signal Warning Speaker PrecautionsPlacement Using Close to a TV or ComputerCenter speaker Speaker set a Speaker set B Indicator OutputEnjoying Home Theater Speaker Sets a and BPackage Contents Features Digital Input Input Display SetupAutomatic Speaker Setup Hdmi VideoContents Front Panel Getting to Know the AV ReceiverDisplay Getting to Know the AV ReceiverXM antenna North American models only Digital in Optical 1, 2 and Coaxial 1Hdmi in 1, 2, and OUT Sirius antenna North American models onlyAiming the Remote Controller Remote ControllerInstalling the Batteries RECEIVER/TAPE Mode Remote ControllerUsing the Remote Controller Buttons used when the Tape input is selected Listening Mode buttonsRemote Mode buttons Buttons used when the Tuner input is selectedDVD Mode Arrow / and Enter buttons CD/MD/CDR/DOCK ModeTo select the input source, press DISC/ALBUM +/- buttonSubwoofer SKW-550 SpeakersSurround back left and right speakers SKB-550 Connecting Your SpeakersEnjoying Home Theater Front left and right speakers SKF-550FUsing the Speaker Terminal Tool Connecting Your SpeakersSpeaker Connection Precautions Connecting Speaker Set aSKF-550F Wall MountingAttach the FM antenna, as shown American Model Connecting AntennasConnecting the AM Loop Antenna Connecting the Indoor FM AntennaUsing a TV/FM Antenna Splitter Connecting AntennasConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksAudio Connection Formats Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Which Connections Should I Use?Hint Connecting a TV or ProjectorDVD player Connecting a DVD playerChoose a video connection from a , B , and C Hooking Up the Multichannel DVD Input DVD player Step Connecting Components with HdmiAssign the Hdmi DVD recorder Connecting a VCR or DVD Recorder for PlaybackVCR or DVD recorder VCRMake the video connection a Make the audio connection a Connecting a VCR or DVD Recorder for RecordingConnecting a Camcorder, Games Console, or Other Device Choose a video connection from a and BSatellite, cable, set-top box, etc Video sourceCD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableRI Dock without video Connecting an RI DockConnecting a Cassette, CDR, MiniDisc, or DAT Recorder RI Dock with videoRemote Control Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbySmooth Operation in a Few Easy Steps Turning On the AV ReceiverTurning On and Standby Measurement Points First Time SetupAutomatic Speaker Setup Audyssey 2EQ/HTIB Using Audyssey 2EQ/HTIB First Time SetupUsing a Powered Subwoofer Error MessagesTo Retry the Automatic Speaker Setup Changing the Speaker Settings ManuallyHdmi Video Setup Changing the Input Display Digital Audio Input SetupBasic AV Receiver Operation Select a suitable listening mode and enjoySee Using the Listening Modes on Playing Your AV ComponentsDisplaying Source Information Using the Multichannel DVD InputPlaying Your AV Components Listening to AM/FM Stations Tuning into AM/FM Radio StationsListening to the Radio Listening to the Radio Presetting AM/FM StationsMuting the AV Receiver Adjusting the Bass and TrebleSetting the Display Brightness Common FunctionsCommon Functions Using the Sleep TimerAdjusting Speaker Levels Using HeadphonesSelecting on the AV Receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesDVD Using the Listening ModesDTS About the Listening ModesOnkyo Original DSP Modes Using the Late Night Function Dolby Digital only Using the CinemaFILTERUsing the Audio Adjust Settings Dolby Digital EX Input Signal Setting Input Channel SettingsPlii and PLIIx Music Mode Settings DTS Neo6 Music Mode SettingSW Sens Listening Angle SettingMultichannel Subwoofer Setting Lstn Angl Listening Angle Recording Audio and Video from Separate Sources Recording Recording the Input Source Speaker Configuration Advanced SetupAdvanced Speaker Settings Crossover Frequency Advanced SetupSpeaker Distance Double BassSpeaker Levels Buttons to select Equalizer, Equalizer SettingsSetup menu closes Correcting Sound and Picture Sync Digital Input Signal FormatsControlling Other Components Entering Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected viaResetting Remote Mode Buttons Resetting the Remote ControllerOperates the VCR STANDBY/ON, TVTV VOL CH +Troubleshooting Troubleshooting Can’t record Remote controller doesn’t workSound changes when I connect my head- phones Can’t control other componentsMemory Backup Tuner Section SpecificationsAmplifier Section Video SectionFront Speaker SKF-550F Powered Subwoofer SKW-550 Center Speaker SKC-550CSpecifications 1ch Home Theater Speaker PackageMemo Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office
Top Page Image Contents