Clock Setting, 2nd ZONE-OFFSET | Oregon AWS888 manual

CLOCK SETTING

Auto-synchronization should be deactivated before you manually set the clock. To do this, follow the instructions stated below and turn the RF CLOCK function OFF in CLOCK SETTING mode.

1.From the HOME MENU access the GENERAL SETTING mode.

Press / to select

CLOCK SETTING, then press ENTER.

2.CLOCK SETTING mode

3.Choose the settings that need to be adjusted:

AWS888 English r23 op

Black

TIME	Set Hour and Minute

YY-MM-DD	Set Year, Month and Date

FORMAT	Set 12 or 24 hour format and
	Analog, Digital or Classic Clock
	display format

RF CLOCK	Set Auto synchronization on or off

2nd ZONE-	Set 2nd zone-time
OFFSET

Exit	Return to previous page

•Press / to choose a setting (the selected item will flash).

•Press ENTER to start making adjustments.

•Press / to change values.

•Press ENTER to confirm changes.

TIP: Press HOME to return to MAIN MENU.

2nd ZONE-OFFSET

You can offset current local time to correspond with the time from another region (2nd zone).

For example, if the current local time is 1:30pm and the time in another region is 3:30pm, you should adjust the 2nd ZONE-OFFSET to +02 to compensate.

10/14/03, 4:32 PM