Getting Started, Batteries, AC Adaptor main unit

GETTING STARTED

BATTERIES

Batteries for the remote and main units are supplied with this product. Press the RESET button whenever you change batteries.

NOTE Insert the batteries in the remote unit before you set up the main unit. Do not use rechargeable batteries.

AC ADAPTOR (main unit)

When the main unit is plugged into the power socket or batteries are inserted for the first time, an opening animation will be shown before the MAIN menu screen.

Connect the AC adaptor to your weather station’s AC socket located on the side of the main unit.

NOTE Batteries are for memory backup purposes only; the AC adaptor should power the main unit.

REMOTE UNIT SET UP

Up to 5 remote units can be used with this product to monitor outdoor temperature and humidity. The remote unit included in this package is used to receive radio frequency signals for the radio-controlled clock, and to measure temperature and humidity. The measurement unit (°C or °F) and channel number (1, 2, 3, 4, or 5) switches are located in the battery compartment of the remote unit, and should be set prior to installation.

NOTE Additional remote units that measure temperature and humidity are sold separately. If you are using more than one remote unit, be sure to select a different channel number for each unit.

The following remote units are compatible with this product:

•THGR228N

•THGR238N

•THR228N

•THGR328N

AWS888 English r23 op

10/14/03, 4:32 PM

Black