MAIN UNIT SENSOR SEARCHING
Press and hold SEARCH for 2 seconds to manually activate sensor searching. The search icon will blink until the remote signal is found or the search period times out.
Search for channel signal (shown in
Searching | Sensor | No sensor |
for Sensor | found | found |
|
|
|
|
|
|
Search for RF clock signal (Shown in
Strong clock and | Weak clock and | No signal | |
remote signal | remote signal | ||
| |||
|
|
| |
|
|
|
If no signal is found, check remote unit batteries.
AWS888 English r23 op | 9 |
Black
EN
NOTE The sensor search will automatically start when the main unit is reset.
GENERAL SETTINGS MODE
All settings and display options for this product are accessible from the MAIN MENU.
NAVIGATING THROUGH MAIN MENU
To access
MAIN MENU from any screen press HOME. Press 
or 
to highlight a desired option then press ENTER to activate it.
CHANGING SETTINGS
1.Press 
or 
to highlight the option you wish to change.
2.Press ENTER to select it.
3.Use the 
UP or 
DOWN buttons to change values.
4.Press ENTER confirm changes.
TIP: Pressing the 
will return you to the previous screen.
9
10/14/03, 4:32 PM