Polaroid P4000 manual Site requirements, Electrical requirements

Page 28

Page 25

Site requirements

Operating environment

•Relative humidity: 20% to 80% non-condensing

•Temperature: 60° F to 95° F (15° C to 35° C)

Electrical requirements

•The external power supply is rated at 100-240 VAC, 50-60 Hz, 1.8 amp. (It adjusts to any power within this range.)

•Single phase, 3-wire, grounded receptacle only.

Physical requirements

• The printer weighs less than 11.5 pounds (5.3 kg). The weight depends on the supplies and options installed.

• The 100-card input hopper is 9.5 inches (241 mm) high and the 200-card hopper is 11.9 inches (302 mm) high.

• The clearances required are 1 inch (25 mm) at the back, 2 inches (51 mm) on the left side, and 10.5 inches (267 mm) above the printer latch to open the cover.

Do not use the printer in a dirty environment. Do not use the printer in a closed compartment. Do not block air flow around the printer.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents P4000 Printer Guide Information resources for the P4000 ID card printer Contents About the printer Outside of the printerPage Inside of the printer Features and options Loading cards Tips Handling cardsPage Loading print ribbon Tips Handling print ribbonPage Check the PC connection Power on the printer Printer does not have a power switchStatus light Status Light Description MeaningStatus Light Description Meaning Opening Printing Preferences Page Open the Printer Toolbox Page Cleaning the printer Cleaning tips Printer supplies Color print ribbonCleaning supplies Color Part numberGetting the most out of your printer Page Troubleshooting What is the problem? Try thisWhat is the problem? Site requirements Electrical requirementsLegal Notices FCC Liability statementDealer information
Top Page Image Contents