Polaroid P4000 manual What is the problem?

Page 27

What is the problem?

5The printer does not respond when printing a card or when clicking “Resume” on the Printer Toolbox.

6The printer cover will not close.

Try this:

•Make sure the printer is plugged in. See ”Power on the printer” on page 10 for more information.

•Make sure the printer is connected to the computer.

•If the Status Light on the printer is blinking amber (yellow), press the Ready button.

•Power the printer off and on (disconnect the power cord from the side of the printer and then connect it again) to see if communication resumes.

•See Info Central for more detailed communication troubleshooting information.

•Make sure no extra items are inside the printer.

•Make sure the print ribbon cartridge is installed correctly. See ”Loading print ribbon” on page 7.

•If you installed or bumped the printhead cartridge, make sure it is installed correctly. See Production in Info Central.

•Push down firmly on the front edge of the cover to latch it.

Page 24

Page 26 Page 28
Image 27
Page 26 Page 28
Contents P4000 Printer Guide Information resources for the P4000 ID card printer Contents Outside of the printer About the printerPage Inside of the printer Features and options Tips Handling cards Loading cardsPage Tips Handling print ribbon Loading print ribbonPage Check the PC connection Printer does not have a power switch Power on the printerStatus Light Description Meaning Status lightStatus Light Description Meaning Opening Printing Preferences Page Open the Printer Toolbox Page Cleaning the printer Cleaning tips Color print ribbon Printer suppliesColor Part number Cleaning suppliesGetting the most out of your printer Page What is the problem? Try this TroubleshootingWhat is the problem? Electrical requirements Site requirementsLiability statement Legal Notices FCCDealer information
Top Page Image Contents