Page 7
Loading print ribbon
1Open the printer cover.
2Remove the ribbon cartridge.
3Remove both used ribbon spools from the cartridge (if present).
Tips: Handling print ribbon
1
1
•Keep unused ribbon in the original package.
•Don’t place ribbon on a dusty or dirty surface– dirt could damage the printhead.
4Run a cleaning card and replace the cleaning sleeve at the same time that you load a new print ribbon. See ”Cleaning the printer” on page 17 for the steps to follow.
5Load the new roll of print ribbon on the cartridge. Put the full spool of ribbon on the supply spindle of the ribbon cartridge. Push until the spool clicks onto the spindle.
6Put the empty