Polaroid 45I quick start Single-35mm Carrier

Page 12

4 Secure the film with the two magnets provided, on the top and bottom edges. Be sure the magnets are also within the raised ridges.

LOCK

UNLOCK

5Place the adapter in the 4x5 carrier, sliding the notches into the pins on the left edge. The film and magnets should be face up, as shown.

6Close the carrier. Squeeze the carrier at the bottom edge and turn the knob to lock it.

The Single-35mm Carrier

1Open the 4x5 carrier as described previously.

2Locate the single-35mm adapter.

Note: You can use a negative, or a mounted or unmounted slide.

3Orient the adapter so the metal tabs face up, and the notches are at the left edge. Slide the film into the channel, under the two metal tabs. Position the film so the image is right- reading and right-side up.

English 12

Image 12
Contents Installation Quickstart SprintScan System Requirements Macintosh SystemsPC Systems Unpack the Box Install the Software Position the ScannerPower Mac or Power PC Windows 95, 98 or NT Set the scanner Scsi addressConnect the Scsi cables Terminator Connect the Scanner to AC Power and Turn On Loading the Film Carriers Four-Slide Film Carrier4x5 Carrier for 4x5 film 120 Film Adapters for 2¼ x 2¼ and 2¼ x 2¾ in. film Single-35mm Carrier Lock Inserting the Carrier into the Scanner Preview-Scan an Image Enhance and Final-Scan the Image Remove the CarrierInstalling a Scsi Host Adapter Limited WarrantyRadio and Television Interference