Polaroid 45I quick start Terminator

25	50	25	50	Terminator
pins	pins	pins	pins
Computer	Other SCSI device			Scanner
	(unterminated)
25	50	25	50
pins	pins	pins	pins

Computer	Scanner	Other SCSI device
		(terminated)

You may need additional cables or adapters to connect the scan- ner. Your cable must have a 50-pin Centronics M or DB-25 M connector at one end for attachment to the scanner, and the cable should be as short as possible. To determine the connector you need for attachment to your SCSI adapter, refer to instructions with the adapter.

Terminate the scanner and all other SCSI devices as shown in the appropriate diagram in the previous section. The last device in the SCSI chain must be terminated (or termination on), while all other devices must be unterminated (or termination off).

Termination instructions for your other SCSI devices are provided with the devices.

English 8