Polaroid 45I quick start Unpack the Box

Page 4

1 Unpack the Box

Make sure you have all the following components. Contact your dealer if any is missing or damaged.

a

b

c

d

e

f

g

h

i

j

aScanner

bPower cable

cThis manual

dPass-through terminator

eSCSI cable (25-pin to 50-pin)

fFilm carrier for 4x5 film

gAdapter for 120 film, 2¼ x 2¼ in.

hAdapter for single 35mm slide

iAdapter for 120 film, 2¼ x 2¾ in.

jFour-slide film carrier

k35mm slide spacer (not shown)

lTwo magnets for 120 film (not shown)

mThe PolaColor Insight Software CD (not shown) containing:

PolaColor Insight software for Windows 95, 98, and NT

PolaColor Insight software for Power MAC and Power PC systems and an Adobe Photoshop plug-in

Online user’s guide

Warning: Nothing inside the scanner is user serviceable. Do not disassemble the scanner. Doing so could result in severe electri- cal shock and damage to the scanner. This action may also void your warranty. Contact Polaroid Technical Support or your dealer if the scanner is malfunctioning. (To contact Polaroid from within the U.S.A., call 1-800-432-5355. Outside the U.S.A., see Getting assistance in the online user’s guide or visit www.polaroid.com on the World Wide Web.)

English 4

Image 4
Contents Installation Quickstart SprintScan Macintosh Systems System RequirementsPC Systems Unpack the Box Install the Software Position the ScannerPower Mac or Power PC Windows 95, 98 or NT Set the scanner Scsi addressConnect the Scsi cables Terminator Connect the Scanner to AC Power and Turn On Four-Slide Film Carrier Loading the Film Carriers4x5 Carrier for 4x5 film 120 Film Adapters for 2¼ x 2¼ and 2¼ x 2¾ in. film Single-35mm Carrier Lock Inserting the Carrier into the Scanner Preview-Scan an Image Enhance and Final-Scan the Image Remove the CarrierInstalling a Scsi Host Adapter Limited WarrantyRadio and Television Interference