Figure 3.1 WiJET.G Banner Page
The messages will be displayed on the top of this image and consist of three lines. The top line displays the SSID and the firmware version of the WiJET.G while the second line reports the channel, radio mode, IP address, and MAC address. The last line displays a list of detected channels that may cause interference.
An example of the messages is given below:
SSID=WiJET.G | Version:1.1.b |
Channel=11 Mode=Local Access Point | IP=169.254.98.170 MAC=00:60:B3:25:4B:41 |
RF activities detected on other channels (none).
There are several variations to the message on the second line. The variations and what they mean are as follows:
RF activities detected on other channels (none).
No other 802.11g channels detected in use other than the WiJET.G at all. Your connection to the WiJET.G should be smooth and error free.
RF activities detected on other channels (8, 9).
WiJET.G Technical Manual | 7 |