Mitsubishi HC1100 user manual Speciﬁcations, Dimension drawings unit mm

Page 37

Speciﬁcations

The speciﬁcations and outside appearance of the projector are subject to change without prior notice.

Type		DLP™ projector
Model		HC1100
Display technology		0.62-inch single chip DMD (aspect ratio 16:9)
		Pixel: 1280 x 720 = 921600 pixels
Projection lens		F 2.4 - 2.6 f= 23 - 27.6 mm
Light-source lamp		200 W
Image size (projection distance)		40” min. to 275” max. (projection distance 1.3 to 10 m)
Maximum	Computer signal	Maximum resolution: 1280 x 1024 dots (analog)/compressed
resolution		Panel resolution: 1280 x 720 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i
	signal	Panel resolution: 1280 x 720 dots
Computer input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	D-SUB 15P	1
		HDMI	HDMI 19P	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	RCA	1
		S-video input	S	1
		Component video input	RCA	1
Control terminal/	SERIAL	RS-232C (8-pin)
others	TRIGGER	DC 12 V, max. 200 mA (stereo mini jack)
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		2.9 A
Dimensions		310 mm (W) x 100 mm (H) x 245 mm (D)		* Not including protrusion.
Weight		2.9 kg
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Component video	YCBCR: Vp-p=1.0 V 75Ω (Y) (negative sync)
	input	Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y)	(negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (HDMI)	HDMI interface (TMDS single link)

ENGLISH

Dimension drawings (unit: mm)

61

245

310

5 100

HDMI IN

SERIAL USB

COMPONENT VIDEO IN

TRIGGER

EN-37

Image 37

Contents HC1100 Risk of Electric Shock Do not Open When using the projector in EuropeContents EN-4 Important safeguardsDo not unplug the power cord during operation Do not keep using the damaged projectorNever remove the cabinet Do not modify this equipment Do not face the projector lens to the sunInserting the batteries into the remote control Checking accessoriesPreparing your projector Control area Terminal panel OverviewUSB terminal Trigger terminalUsing the picture quality adjusting buttons Remote controlAdjustment foot Front Lamp cover Adjustment feet Rear Preparing your projectorOperational range of the remote control Using the remote controlReception angle Front of projector Rear of projectorSetting up the screen Setting up your projectorBasic setup Adjusting the projection angleTo cancel the menu With the Installation menu See page 24 for menu settingTrigger terminal When the aspect ratio of the screen is Setting up your projectorWhen the aspect ratio of the image is Screen size and projection distanceViewing video images Connecting the projector to video equipmentBasic home theater system connection PreparationConnecting to a DVD player or Hdtv decoder Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesConnection for video equipment having a DVI-D terminal Connection for video equipment having an Hdmi terminalPlugging in the power cord Projecting images To stop projecting When projected images are distorted to a trapezoidFollowing cases How to change the settings Setting the aspect ratioWith the remote control With the Feature menuPlugging the power cord Connecting the projector to a computerViewing computer images For analog connectionProjecting images Example of the setting procedure for external output When connecting to a notebook computerViewing computer images Auto Position buttonMenu operation Available settings in the menus How to set the menusMenu operation Image menuFeature menu Installation menuTo store the settings Signal menuTo enable the stored image quality settings AV memoryTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature To adjust the ratio of change in brightness Gamma ModeLPF To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionReplacing the lamp Interval of lamp replacementCleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time Replacing the lampProblem TroubleshootingSolution No image appears on the screenNo image appears on the screen Problem Solution TroubleshootingProblem Solution Images are not displayed correctlyKensington Lock Others Problem SolutionPower Status Condition Possible Solution IndicatorsNormal condition Abnormal conditionSpeciﬁcations Dimension drawings unit mmReplacement part Option/not included in the box ConnectorsSpeciﬁcations VLT-HC910LPMitsubishi Projector Contact Information