FRONT PANEL CONTROL
•• Power Button:
Press this button to switch ON/OFF monitor’s power.
•• Power Indicator:
Blue — Power On mode.
Orange
•• MENU / ENTER :
Activates OSD menu or function adjust confirm.
•• ECO/(-)
Activates the ECO control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
•• Volume /+ :
Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
•• Source / Auto Adjust / Exit
When the OSD is OFF, pressing Auto/Source button will toggle between sources. Press continuously to select the input source indicated in the message bar. Press Menu/Enter button to change to the selected source. Auto configure hot key: (VGA input only) When the OSD is OFF, press and hold down the button for 2 seconds to auto configure. When OSD menu is ON, this button will act as a Exit Key (Exit OSD menu)
OSD Lock Function:
To lock the OSD, press and hold the MENU button while the monitor is off and then Press power button to turn the monitor on. To
NOTES
•• Do not install the monitor in a location near heat sources such as radiators or air ducts, or
in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
•• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
•• For maximum protection, repackage your monitor as it was originally packed at the factory.
•• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
•• Do not scratch the screen with hard things, it may cause permanent damage.
•• Don’t leak liquid into monitor which will result in the damage of component.
11