Planar user manual How to Connect Cables, Connection of Single PS5580

Page 12

3. How to Connect Cables

•Do not connect/disconnect cables while PS5580 or other external equipments are turned on.

•First turn off the power all the attached equipment and make connections.

•Make sure the power cord is inserted properly into the power inlet to prevent unexpected pullout of the cord.

3.1. Connection of Single PS5580

•PS5580 and PC should be connected; a Com Port in a PC and RS-232C IN port in a PS5580 is connected with supplied RS-232C cable.

•If you do not have Com Port, you need to use an USB converter for RS-232C. Depending on manufacturers or models, converters may cause malfunction.

IR Reception
	LAN	IR	RS232C	RS232C	DP	HDMI HDMI	DVI	DVI	PC	AC
			IN	OUT	IN	1-IN 2-IN	IN	OUT	IN	IN
SRC MODE	ENT IR

LAN

IR

RS232C IN

RS232C OUT

DP IN

HDMI 1-IN HDMI 2-IN

DVI IN

DVI OUT

PC IN

AC IN

	HDMICable ((Max. Length : 5m)
DVD player	DP Cable ((Max. Length : 5m)
		LAN Cable (Cross cable)
LAN Cable		LAN Cable (Direct cable)

(Direct cable)	HUB or Router
	RS-232 (Max. Length : 15mm)
	HDMICable ((Max. Length : 5m)
Control PC	PC Connection	(Maximum 5m)

	DVI connection	((Max. Length : 5m)

- 20 -

- 21 -

Image 12

Contents User’s Manual Supplied Accessories Contents Do not install the set at the air-tight condition It is recommended to install the set with good ventilation※Clearance for Ventilation ※Please keep following It always needs two persons to carry or install When you carry PS5580 with up straightPanel when you put down the panel PS5580※Attention for Installing Safety Precautions Remote controller input port NamesDisplay control via Ethernet RJ45 Display control via COM port D-Sub 9pinKEY PAD How to Connect Cables Connection of Single PS5580Resolution Output Port Connection Remark Connection of Multiple PS5580 for DPConnection of Multiple PS5580for DVI Connection of Control Cable How to use Remote Controller Configuration Brightness ContrastBack Light SharpnessColor Temperature TintColor Adjust Color Balance Color BalanceGamma Selection Select Color Balance from Picture MenuPicture Reset Color SpacePosition Select H Position from Screen menuSelect Screen Menu Select V Position from Screen menuScreen Reset ClockSelect Auto Adjust from Setup a menu Select Setup a Menu‚ Each of the value can be adjusted by pressing buttons Power Save Auto PowerSelect Power Save from Setup a menu Select Auto Power from Setup a menuSetup a Reset Select Language from Setup a menuSelect Setup a Reset from Setup a menu LanguageSelect KEY Lock from Setup a menu Setup the KEY LockSelect Setup B Menu KEY LockLAN Setting Serial ControlSelect OSD from Setup B menu Setup the functionSetup the turn off time OSDSetup the Rotation Select OSD H PositiionSelect OSD V Positiion Select Rotation from OSD menuSetup the Info Display Setup the TransparencySelect Info Display from OSD menu Select Transparency from OSD menuOFF Timer Setup B ResetSelect OFF Timer from Setup B menu Setup the OFF TimerFactory Reset Select Factory Reset from Setup B menuSub-menus can be configured Select Option menuInput Resolution Change Security PasswordTiling Menu Lock Group IDSetup the Tiling Select the IR Contol IR ControlTiling Select IR Control from Option menuPower on Delay Power on Input DetectBefore calling for service Applicable signalsTick sound from the main body No image at upper and lower part of the screenSpecification Regulatory InformationEN61000-4-8 Magnetic Field Immunity EN61000-4-11 EN61000-3-2Dimension Memo

Related manuals

Manual 21 pages 13.77 Kb

Manual 38 pages 53.75 Kb