Planar PS5580 user manual ※Please keep following

Page 6

WARNING

	※Please keep following
	instruction for panel protection
Warning	without exception.

-This product can be damaged even with minor impact for its nature.

Please keep following instruction to carry or store the products.

※Handle with Caution.

-Shock/Impact on the set's sides will result in internal

	Warning	circuit damages.
	Warning	-The edge/bottom of the panel are fragile.
		-The edge/bottom of the panel are fragile.
		Use shock-absorbing pads or rugs for laying down the
		product.

WARNING

PANEL	PANEL
PANEL
	CUSHION
	PANEL

PANELPANEL

•If you need to stand LCD, you must lean over the LCD to avoid panel touches ground or oor .

•If you need to lay down LCD as face down position, please use shock-absorbing pads under the LCD.

•If you need to lay down LCD as face up position, please be cautious for falling objects on the surface of the LCD.

•Please do not stand LCD alone. It may fall or slip o and Panel can be broken or damaged.

•Please do not lean over the LCD. It may damage the bottom part of the LCD.

•Please do not lean over the LCD toward the edge part. It may damage the edge part of the LCD.

- 8 -

- 9 -

Image 6

Contents User’s Manual Supplied Accessories Contents Do not install the set at the air-tight condition It is recommended to install the set with good ventilation※Clearance for Ventilation ※Please keep following Panel when you put down the panel It always needs two persons to carry or installWhen you carry PS5580 with up straight PS5580※Attention for Installing Safety Precautions Display control via Ethernet RJ45 Remote controller input portNames Display control via COM port D-Sub 9pinKEY PAD How to Connect Cables Connection of Single PS5580Resolution Output Port Connection Remark Connection of Multiple PS5580 for DPConnection of Multiple PS5580for DVI Connection of Control Cable How to use Remote Controller Configuration Back Light BrightnessContrast SharpnessColor Temperature TintColor Gamma Selection Adjust Color BalanceColor Balance Select Color Balance from Picture MenuPicture Reset Color SpaceSelect Screen Menu PositionSelect H Position from Screen menu Select V Position from Screen menuScreen Reset ClockSelect Auto Adjust from Setup a menu Select Setup a Menu‚ Each of the value can be adjusted by pressing buttons Select Power Save from Setup a menu Power SaveAuto Power Select Auto Power from Setup a menuSelect Setup a Reset from Setup a menu Setup a ResetSelect Language from Setup a menu LanguageSelect Setup B Menu Select KEY Lock from Setup a menuSetup the KEY Lock KEY LockLAN Setting Serial ControlSetup the turn off time Select OSD from Setup B menuSetup the function OSDSelect OSD V Positiion Setup the RotationSelect OSD H Positiion Select Rotation from OSD menuSelect Info Display from OSD menu Setup the Info DisplaySetup the Transparency Select Transparency from OSD menuSelect OFF Timer from Setup B menu OFF TimerSetup B Reset Setup the OFF TimerSub-menus can be configured Factory ResetSelect Factory Reset from Setup B menu Select Option menuInput Resolution Change Security PasswordTiling Menu Lock Group IDTiling Setup the Tiling Select the IR ContolIR Control Select IR Control from Option menuPower on Delay Power on Input DetectTick sound from the main body Before calling for serviceApplicable signals No image at upper and lower part of the screenEN61000-4-8 Magnetic Field Immunity EN61000-4-11 SpecificationRegulatory Information EN61000-3-2Dimension Memo

Related manuals

Manual 21 pages 13.77 Kb

Manual 38 pages 53.75 Kb