Planar SD2420W manual Usage Notice, Don’t

Page 3

Usage Notice

To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture.

Do not open or disassemble the product, as doing so may cause electric shock.

Follow all warnings, precautions, and maintenance as recommended in this user’s guide to maximize the life and performance of your unit.

Do

Turn off the monitors before cleaning.

Use only a dry, soft cloth or clean room wipe when cleaning the LCD panel surface or the half-mirror.

Use a soft cloth moistened with water and/or mild detergent to clean the display housing and stand.

Use only high quality and safety approved AC/DC power adapters.

Disconnect the power plug from the grounded AC outlet if the product will not be used for a long period of time.

Don’t

Do not touch the LCD panel or half-mirror surfaces with sharp or hard objects.

Do not use abrasive cleaners, waxes, or solvents for your cleaning.

Do not operate the product under these conditions:

In an extremely hot, cold, or humid environment

In areas susceptible to excessive dust and dirt

Near any appliance generating a strong magnetic field

In direct sunlight

User’s Guide iii

Image 3
Contents SD2420W Planar Systems, Inc NW Compton Drive Beaverton, or Don’t Usage NoticeBox Contents Two DVI cables 6-ft and 12-ft Contents Complex data analysis Stereoscopic ViewingStereoMirror Technology Defined the 3D Assemble the unit Getting StartedUser’s Guide Select a graphics card Install the mirror-flip PCI cardConnect the cables Check the alignment Connect the power cordsOperating in 2D mode Product UseUser controls and OSD menu Power management Monitor Specifications DisplaysVideo Size and weight Plug and PlayEnvironment Accessories System CareSoftware Compatibility Problem Possible Solution TroubleshootingProduct Registration WarrantyImportant Recycle Instructions CRT RecyclingPlanar Customer Service Mailplanarsupport@planar.com