Planar VS17.4SXAD manual Power Management System, Landscape-to-Portrait Mechanical Conversion

10 Installing the Display

Power Management System

The VitalScreen CSR and VitalScreen CR displays comply with the VESA Display Power Management Signaling (DPMS) standard. This standard provides four power-saving modes, based on the display detecting the horizontal or vertical sync signals. This table describes the four modes.

Mode	AC Input Power1	LED Status
On	60 watts maximum	Steady green
Standby	5 watts maximum	Blinking green
Suspend	5 watts maximum	Blinking green
Off	5 watts maximum	Off

1Including AC adapter

When the display is in power-saving mode or detects incorrect timing, the screen is blank and the power LED indicator blinks.

Landscape-to-Portrait Mechanical Conversion

The 17.4" display (deskstand version) has a unique feature that allows a mechanical conversion of the display from the traditional landscape mode to a vertical portrait mode.

Use both hands whenever you are changing the orientation of the display.

1Gently pull the lower half of the display toward you.

You must tilt the display upward before rotating it.

2Rotate the display 90 degrees to left (counterclockwise) until it stops in portrait mode.

3Select, if necessary and/or available, the different option on the video card, or display settings on the control panel.

4Refer to www.portrait.com for software that allows conversion from landscape to portrait mode.

VS17.4SXAD / CM17.4SXAD (020-0168-00B)