Panasonic WV-CW504FK WV-CW504S Make a connection, •Video output connection, •Power connection

Make a connection

Cautions:

•ONLY CONNECT WV-CW504 TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.

•Be sure to connect the grounding lead to the GND terminal.

Power cord (approx. 17 cm

{55.8 ft})

Brown (Live)	To 24 V AC/12 V DC*
Blue (Neutral)	power supply
Green/Yellow (GND)	To GND (only for 24 V AC)

*When using 12 V DC power supply, the optional heater unit is unavailable.

BNC connector BNC connector

Video output cable (approx. 16 cm {52.5 ft})

BNC connector

To VIDEO IN

•Video output connection

The video output connector is connected to the monitor or other system devices with a coaxial cable (locally procured).

The maximum extensible length is shown in the table.

Type of	coaxial		RG-59/U	RG-6/U	RG-11/U	RG-15/U
cable			(3C-2V)	(5C-2V)	(7C-2V)	(10C-2V)
Recommended		m	250	500	600	800
maximum	cable
		ft	825	1 650	1 980	2 640
length

•Power connection

Precaution:

The following connections should be made by qualified service personnel or system installers in accordance with NEC 725-51.

•Wire colors & functions

Camera power cord

Wire color	24	V AC	12 V DC
Brown	24	V AC (L)	Positive
Blue	24	V AC (N)	Negative
Green/yellow	To GND		–

Cautions:

•Be sure to connect the GND (grounding) lead of the camera and grounding terminal of the power supply when using a 24 V AC power source.

•Shrinking the cable-entry seal is a onetime procedure. Do not shrink the cable-entry seal until it has been ascertained that unit is functioning.

ONLY CONNECT THIS TO 24 V AC or 12

V DC CLASS 2 POWER SUPPLY.

30