![Optional Heater Unit WV-CW5H (option)](/images/new-backgrounds/30996/3099663x1.webp)
Optional Heater Unit WV-CW5H (option)
Installing the heater unit enables the camera to operate in a
Important:
•When using 12 V DC power supply, the optional heater unit is unavailable.
•Turning the heater on and off may disturb the camera images.
•The power supply of the camera shall be turned off when mounting or dismounting the heater.
When servicing, pay attention to high temperature on the surface of the heater unit. Disconnect the harness and wait until the heater unit cools.
•When the camera is installed and operated in low temperatures below
How to install the heater unit
qRemove the camera’s enclosure and mount it in the specified position with the supplied screw. w Connect the heater unit cable to the connector of the camera.
Screw for heater unit* (supplied with heater unit)
Heater output connector
* Two screws including a spare screw are provided as the standard accessories.
Important:
•After mounting the heater unit, arrange the harness cable as shown in the drawing so as not to be tangled around the enclosure, safety wire, and equipment inside the camera.
32