Precautions
The following points as well as the con- tents of "Warning" and "Caution" shall be observed.
Refer installation work to the dealer.
Installation work requires technique and experi- ences. Otherwise injury, or damage to the product may result.
Be sure to consult the dealer.
Do not insert objects inside the product.
If water or metallic items enter the product, it may cause fire or electric shock.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble or modify the product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when some- thing is wrong with the product.
When smoke goes up from the product or the smell of smoke comes from the product, con- tinued use will result in fire, injury, or damage to the product.
Turn the power off immediately and contact qualified service personnel for service.
Select an installation area that can sup- port the total weight.
Selecting an inappropriate installation surface may cause the product to fall down or topple over, resulting in injury.
Installation work shall be started after sufficient reinforcement.
Periodic inspections shall be conducted. Rust on the metal parts or screws may cause the product to fall down resulting in injury. Consult the dealer for the inspections.
This product shall be installed in a vibra-
Failure to observe this may cause screws and bolts to be loosened and consequently to fall resulting in injury.
Install this product high enough to ensure that people don't hit their heads.
Failure to observe this may cause a drop result- ing in injury or accidents.
Do not strike or give a strong shock to this product.
Failure to observe this may cause injury or fire.
Be sure to turn off the power before wir- ing.
Failure to observe this may cause electric shock. A short circuit or wrong wiring may cause fire.
Do not use the product in an atmosphere of flammable gases.
Failure to observe this may cause injury by explosion.
Avoid installing the product in locations where it is subject to damage by salt or corrosive gas.
Otherwise the mounting fixtures will deteriorate, causing the product to fall down and leading to accidents.
Use the specified mount bracket.
Failure to observe this may cause a drop result- ing in injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Tighten screws and mounting fixtures to the specified torque.
Failure to observe this may cause a drop result- ing in injury or accidents.
8
